OPC Polymers http://www.opcpolymers.com Mon, 13 May 2013 16:30:59 +0000 en hourly 1 POLYCHEM SA6009-EB-75 http://www.opcpolymers.com/products/detail/sa6009-eb-75/ http://www.opcpolymers.com/products/detail/sa6009-eb-75/#comments Wed, 18 Apr 2012 01:13:51 +0000 admin Polychem SA6009-EB-75 (Z2240)

Polychem SA6009-EB-75 is an water reducible alkyd resin. It provides excellent adhesion and flexibility. When neutralized with a suitable amine it may be used in air, force dry or bake systems to give excellent early water and salt spray resistance. This resin may also be blended with water reducible melamine to obtain full gloss enamels that are hard and chemical resistant.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z6-Z7
Acid Number 44 to 51
Gardner Color 6 Maximum
Weight Per Gallon 8.74 ± 0.1
Solvent Ethylene Glycol Monobutylether
Modifier -
Oil Soya FA
Reduced Viscosity -
Reduced NVM -
Reduction Solvent
Clarity CLEAR TO SLT HAZE

 

SUGGESTED USES
Air dry/force dry/bake equipment enamels, small appliances, primers, dipping enamels, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt, % 0.1
Manganese, % 0.1
Antiskin, % 0.5
(if desired)
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/sa6009-eb-75/feed/ 0 POLYCHEM 7711-BA-70 http://www.opcpolymers.com/products/detail/7711-ba-70/ http://www.opcpolymers.com/products/detail/7711-ba-70/#comments Wed, 18 Apr 2012 01:13:51 +0000 admin Polychem 7711-BA-70 (Z8963)

Polychem 7711-BA-70 is an HAPs free coconut short oil alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z1-Z3
Acid Number 8
Gardner Color 4 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier -
Oil Coconut Oil
Reduced Viscosity Q-T
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/7711-ba-70/feed/ 0 POLYCHEM P5003-B-75 http://www.opcpolymers.com/products/detail/p5003-b-75/ http://www.opcpolymers.com/products/detail/p5003-b-75/#comments Wed, 18 Apr 2012 01:13:50 +0000 admin Polychem P5003-B-75 (Z2224)

Polychem P5003-B-75 is an oil free polyester. It offers a combination of good hardness, flexibility, and impact restance, along with excellent color retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z3
Acid Number 8
Gardner Color 2 Maximum
Weight Per Gallon 9.16 ± 0.1
Solvent Blend
Modifier -
Oil NONE
Reduced Viscosity -
Reduced NVM -
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Used in high quality baking finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
N/A
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/p5003-b-75/feed/ 0 POLYCHEM G7692-X-65 http://www.opcpolymers.com/products/detail/g7692-x-65/ http://www.opcpolymers.com/products/detail/g7692-x-65/#comments Wed, 18 Apr 2012 01:13:49 +0000 admin Polychem G7692-X-65 (Z2105)

Polychem G7692-X-65 is an medium oil semi-oxidizing alkyd. It has good adhesion. When used as a plasticizer for nitrocellulose lacquers it imparts cold check resistance, adhesion, toughness, and recoatability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H X-Z
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier -
Oil Tall Oil Fatty Acid
Reduced Viscosity H-L
Reduced NVM 55
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers. Also, it can be used with melamine-formaldehyde resins in baking enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
None.
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g7692-x-65/feed/ 0 POLYCHEM G2510-MS16-50 http://www.opcpolymers.com/products/detail/g2510-ms16-50/ http://www.opcpolymers.com/products/detail/g2510-ms16-50/#comments Wed, 18 Apr 2012 01:13:48 +0000 admin Polychem G2510-MS16-50 (Z2039)

Polychem G2510-MS16-50 is an glyptal medium oil alkyd. It is a general purpose vehicle for brushing or spraying enamels and primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent MS-16
Modifier -
Oil Soybean Oil
Reduced Viscosity G-J
Reduced NVM 40
Reduction Solvent MS-16
Clarity 10 Max

 

SUGGESTED USES
Used for lighter colors or low bake applications, and for dipping enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 4-6 hrs.
Hard
Driers
Cobalt 0.04%
Calcium 0.1%
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g2510-ms16-50/feed/ 0 POLYCHEM P5002-100-83 http://www.opcpolymers.com/products/detail/p5002-100-83/ http://www.opcpolymers.com/products/detail/p5002-100-83/#comments Wed, 18 Apr 2012 01:13:48 +0000 admin Polychem P5002-100-83 (Z2221)

Polychem P5002-100-83 is an high solids oil free polyester. It offers a combination of good hardness, flexibility, and impact resistance, along with excellent color retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 82.5
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 1 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent 100
Modifier -
Oil
Reduced Viscosity F-H
Reduced NVM 65
Reduction Solvent Hisol 10
Clarity CLEAR

 

SUGGESTED USES
Used in quality baking finishes. It is also an excellent vehicle for the production of major appliance finishes, metal furniture finishes, cabinet finishes, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
None.
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/p5002-100-83/feed/ 0 POLYCHEM G2570-X-60 http://www.opcpolymers.com/products/detail/g2570-x-60/ http://www.opcpolymers.com/products/detail/g2570-x-60/#comments Wed, 18 Apr 2012 01:13:47 +0000 admin Polychem G2570-X-60 (Z2045)

Polychem G2570-X-60 is an short coconut oil alkyd. It has good compatibility with epoxy, vinyl, and 1/2 second cellulose acetate butyrate. It is also an excellent nitrocellulose plasticizer. It has outstanding color retention and exterior durability when it is treated with melamine formaldehyde resins.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 4 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier -
Oil Coconut Oil
Reduced Viscosity T-W
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used automotive and industrial lacquers, appliance finishers, and reflector enamels. It is also an excellent nitrocellulose plasticizer.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard
Driers
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g2570-x-60/feed/ 0 POLYCHEM G7830-B-84 http://www.opcpolymers.com/products/detail/g7830-b-84/ http://www.opcpolymers.com/products/detail/g7830-b-84/#comments Wed, 18 Apr 2012 01:13:46 +0000 admin Polychem G7830-B-84 (Z2204)

Polychem G7830-B-84 is an medium oil semi-oxidizing alkyd. It is high solids.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 84
Viscosity, G-H Z4.5-Z6
Acid Number 18 to 30
Gardner Color 6 Maximum
Weight Per Gallon 9 ± 0.1
Solvent Blend
Modifier -
Oil Tall Oil Fatty Acid
Reduced Viscosity -
Reduced NVM -
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Used in conjunction with amino resins to form high solid acid curing finishes free from aromatic solvents.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
N/A
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g7830-b-84/feed/ 0 POLYCHEM G7662-X-50 http://www.opcpolymers.com/products/detail/g7662-x-50/ http://www.opcpolymers.com/products/detail/g7662-x-50/#comments Wed, 18 Apr 2012 01:13:45 +0000 admin Polychem G7662-X-50 (Z2094)

Polychem G7662-X-50 is an glyptal semi-oxidizing alkyd. It has very good hardness, flexibility, color and gloss retention. It has better air drying characteristics than G6581, which is similar.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier -
Oil SOYA/TOFA
Reduced Viscosity R-V
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used for fast air dry and bake primers, as well as melamine modified industrial enamels and catalyzed urea finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers:
Cobalt 0.04%
Calcium 0.2%
Zirconium 0.1%
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g7662-x-50/feed/ 0 POLYCHEM G7590-X-60 http://www.opcpolymers.com/products/detail/g7590-x-60/ http://www.opcpolymers.com/products/detail/g7590-x-60/#comments Wed, 18 Apr 2012 01:13:44 +0000 admin Polychem G7590-X-60 (Z2078)

Polychem G7590-X-60 is an short oil non-drying alkyd. It has low viscosity, excellent compatibility, adequate hardness, and good sanding in lacquers. It also has a high order color retention and good flexibility.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H U-W
Acid Number 10
Gardner Color 3 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier -
Oil Coconut Oil
Reduced Viscosity E-I
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers for wooden furniture.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
None
Note: There is a print link embedded within this post, please visit this post to print it.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
]]> http://www.opcpolymers.com/products/detail/g7590-x-60/feed/ 0