Monomer Modified Alkyds

 

Resin % NVM Solvent #/GAL
+/-0.1
NV Acid
Num Max
Gardner
Color
Max
Visc
G-H
Red
Visc
G-H
Red
NVM
%
Oil Modifier Applications
7006 50 X 8.1 15 5 N-R C-E 40 SBO ACR Economical high performance acrylic alkyd for aerosol and fast dry industrial applications. Hydroxyl #53.
7060 60 VM&P 7.7 10 6 Z-Z2 D-E 40 SBO VT/ACR Excellent Durability and Fast Dry
7138 50 VM&P 7.45 8 5 Z2-Z4 M-O 35 LSO/ SBO VT Fast dry lacquers and enamels.
7147 50 VM&P 7.45 12 5 Z-Z2 S-U 40 SBO VT General purpose fast dry alkyd copolymer. Excellent water resistance.
7292 60 VM&P 7.6 10 6 Z-Z3 D-F 40 SBO VT Economical-superior stain resistance-fast dry.
7378 52 X 8.1 16 5 U-W C-F 37 SBO STY Fast dry, economical soya styrenated alkyd cut in xylene.
7410 60 MS 7.7 10 5 Z-Z2 E-G 40 SBO VT 8-6693 VT alkyd in mineral spirits – can be used as a modifier for long and medium oil alkyds.
7445 75 VM&P 8 5-10 7 Z-Z2 I-M 60 SBO VT Fast dry, high solids soya VT alkyd cut in VM&P.
7447 80 nBAc 8.3 16 6 Z4-Z6 D-F 60 SBO VT High solids-excellent dry, for aerosols and enamels. Low HAP.
7447 80 X 8.3 16 6 Z4-Z6 D-F 60 SBO VT High solids – excellent dry, for aerosols and enamels, cut in Xylene.
7459 50 X 8 14 4 N-R DCO ACR Premium high performance acrylic alkyd. Hydroxyl #64.
7519 70 BLEND 8.4 14 5 W-Z E-G 60 SBO/ SUN ACR High solids-premium acrylated alkyd-HAP free. Hydroxyl 30 – 40.
7520 60 KD 7.45 13 7 X-Z1 D-E 40 LSO VT VT oil similar to 7563 but cut in KwikDri.
7528 60 KD 7.65 12 6 Z2-Z4 F-H 40 SBO VT Same as 7292 but reduced in KwikDri.
7563 60 VM&P 7.4 4 5 Y-Z1 C-F 40 LSO VT Sanding sealers, aerosol, primer, and enamels – lacquer type dry, copolymer.
7565 60 MS/ 100 7.8 8 6 Z2-Z4 I-M 40 SBO VT/ ACR Same as 7060 but cut in mineral spirits. HAP free.
7577 65 KD 7.6 13 7 Z-Z2 C-E 45 LSO VT Higher solids version of 7520.
7581 80 MPK/ MAK 8.4 10 7 Z5-Z7 E-G 60 OX ACR Premium acrylic modified alkyd. Excellent durability. Early water resistance. Hydroxyl #42.
7584 60 VM&P/ 100 7.7 10 6 Z-Z2 D-E 40 SBO VT/ ACR HAPS Free version of 7060-V-60.
7634 60 tBAc 8.3 14 4 Z1-Z3 T-V 50 DCO ACR t-Butyl Acetate cut version of 7459. Hydroxyl # 64.
7646 60 VM&P 7.4 4 5 Y-Z1 C-F 40 SBO VT Soya version of 7563.
7661 70 tBAc 8.3 16 5 Z3-Z7 SBO VT t-Butyl Acetate cut version of 8-6693.
7683 80 MPK/MAK 8.5 10 7 Z3-Z7 F-L 60 OX ACR Cost effective, premium acrylic modified alkyd. Excellent durability. Early water resistance. Hydroxyl #50.
7753 60 nBAc 8.35 12 5 Z-Z2 Q-T 50 DCO ACR Premium high performance acrylic alkyd. Hydroxyl #64.
7761 65 nBAc 8.4 10 6 Z-Z2 H-L 50 STY/ACR Economical HAPs free acrylic alkyd for aerosol and fast dry industrial applications. n-Butyl Acetate version of 7006.
8-6693 60 VM&P 7.65 10 5 Y-Z1 D-F 40 SBO VT Fast dry high gloss enamels and top coats; aerosol paints. Similar to 7410 at 60% non-volatiles in VM&P.
OP 7655 75 KD 7.8 10 6 Z-Z3 J-M 60 LSO VT High solids VT oil for lower V.O.C. fast dry coatings.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
This entry was posted in CATEGORY INDEX. Bookmark the permalink.

Comments are closed.