OPC Logo

Polychem 7447-X-80 (Z8041)

Polychem 7447-X-80 is an very fast air drying vinyl toluene co-polymer resin supplied at 80% solids in xylene. It is useful as the binder in aerosol formulations, industrial enamels and sanding sealers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosol coatings
Wood finishes
Sanding sealers
Industrial enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Zirconium 0.20%
Calcium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

Copyright © 2013 OPC Polymers. All rights reserved.

Printed from http://www.opcpolymers.com on 3/29/2024