OPC Logo

Polychem 7517-M-75 (Z8123)

Polychem 7517-M-75 is an high solids medium oil alkyd for use in air dry / forced dry systems. Brush enamels or primers with VOC levels of 340-400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 4 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity D-G
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Spray or dip primers
Brush enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.40%
Calcium 0.04%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

Copyright © 2013 OPC Polymers. All rights reserved.

Printed from http://www.opcpolymers.com on 3/28/2024