OPC Logo

Polychem 7549-M-90 (Z8249)

Polychem 7549-M-90 is an high solids long oil alkyd designed as a modifying resin for VOC compliant enamels to meet the AIM limits of 380g/l for nonflat coatings. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

Percent Non Volatile 90
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Oil Sunflower Oil
Reduced Viscosity H-K
Reduced NVM 65
Reduction Solvent Mineral Spirits, Low Aromatic


Blend vehicle for architectural or general industrial enamels to reduce the VOC of other conventional resins.


DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
Zirconium 0.30%
Dri-Rx 0.1
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

Copyright © 2013 OPC Polymers. All rights reserved.

Printed from http://www.opcpolymers.com on 11/28/2022