Medium Oil Alkyds

POLYCHEM 3279-M-50

Polychem 3279-M-50 (Z4096)

Polychem 3279-M-50 is an pure soya medium oil alkyd formulated to give excellent pigment wetting properties. It will also take a longer “drink” of solvent than conventional medium length alkyds in paint formulations. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 7.7 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity S-V
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
General utility enamels
Architectural enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Calcium 0.04%
Zirconium 0.40%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 2240-M-50

Polychem 2240-M-50 (Z4077)

Polychem 2240-M-50 is an pure medium length alkyd which meets Federal Specifications TT-R-266(d), Type III. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H X-Z
Acid Number 5 to 12
Gardner Color 10 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Linseed Oil / Soybean Oil
Reduced Viscosity F-G
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Trade sales
Industrial finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 2279-B-50

Polychem 2279-B-50 (Z4090)

Polychem 2279-B-50 is an medium oil alkyd formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z5
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent VM&P/Iso Butanol
Modifier –
Oil Soybean Oil
Reduced Viscosity T-V
Reduced NVM 40
Reduction Solvent VM&P
Clarity 10 MAX

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6994-V-50

Polychem 6994-V-50 (Z5027)

Polychem 6994-V-50 is an medium oil soya alkyd designed specifically for applications where fast dry is of importance. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 7.5 ± 0.1
Solvent VM&P
Modifier –
Oil Soybean Oil
Reduced Viscosity G-I
Reduced NVM 40
Reduction Solvent VM&P
Clarity Clear to slightly hazy

 

SUGGESTED USES
Traffic paint
Farm and implement enamels
General metal primers and topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
Manganese 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7038-M-60

Polychem 7038-M-60 (Z0789)

Polychem 7038-M-60 is an medium oil soya alkyd designed as a vehicle for maintenance and equipment enamel. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity O-R
Reduced NVM 45
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity 10 MAX

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Manganese 0.03%
Zirconium 0.3%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,