Compliant Resins

POLYCHEM 7637-TBA-65

Polychem 7637-TBA-65 (Z8755)

Polychem 7637-TBA-65 is an short coconut alkyd solution for use as a baking vehicle in combination with amnioplast resins or as a plasticizer for lacquers. This is a t-Butyl Acetate version of 7610 and is used to formulate very low VOC coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Baking Enamels
Plasticizer for Lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7696-BA-75

Polychem 7696-BA-75 (Z8944)

Polychem 7696-BA-75 is an short oil TOFA based chain stopped alkyd supplied @ 75% in N-Butyl Acetate. The resin provides finishes with excellent dry, gloss retention and low VOC content.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity A-D
Reduced NVM 50
Reduction Solvent
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.01%
Manganese 0.15%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7683-B-80

Polychem 7683-B-80 (Z8919)

Polychem 7683-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z3-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity F-L
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX @80% NVM
0 MAX @ 70% NVM

 

SUGGESTED USES
Farm implements/equipment
Metal Product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7657-TBA-60

Polychem 7657-TBA-60 (Z8835)

Polychem 7657-TBA-60 is an medium oil Soya alkyd designed specifically for applications where fast dry is of importance. This product is low-VOC and is a t-Butyl Acetate cut version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H P-T
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Traffic Paint
Farm and Implement Enamels
General Metal Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.05%
Manganese 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7639-TBA-60

Polychem 7639-TBA-60 (Z8765)

Polychem 7639-TBA-60 is an chain stopped TOFA alkyd formulated for use in fast drying durable finishes. This product is thinned in t-Butyl Acetate version of 6868 and used for very low VOC formulations.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 14
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity L-P
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Air dry or bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.40%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7635-T-BA-60

Polychem 7635-T-BA-60 (Z8747)

Polychem 7635-T-BA-60 is an short linseed/rosin/phenolic modified oxidizing alkyd which offers lift resistance and fast dry. This is the same as OPC 7348-X-50 but reduced in t-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 15 to 25
Gardner Color 12 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity P-S
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 max

 

SUGGESTED USES
Primers and surfacers
Fast drying enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7675-X-90

Polychem 7675-X-90 (Z8887)

Polychem 7675-X-90 is an high solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-VOC and can be formulated into low-VOC coatings where HAP-free is not a necessity.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z4-Z6
Acid Number 10
Gardner Color 12 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent Xylene
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity U-Y
Reduced NVM 80
Reduction Solvent Xylene
Clarity 10 max

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7648-tBA-65

Polychem 7648-tBA-65 (Z8807)

Polychem 7648-tBA-65 is an castor based plasticizing alkyd useful in nitrocellulose lacquers and baked enamels in combination with aminoplast resins. This is a tBAc cut version of 7562-X-65.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H V-Y
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil CASTOR
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity 20 MAX

 

SUGGESTED USES
Lacquer plasticizer
Bake finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7641-EB-70

Polychem 7641-EB-70 (Z8777)

Polychem 7641-EB-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is an EB cut of 7588 and HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent Ethylene Glycol Monobutylether
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity clear to slightly hazy

 

SUGGESTED USES
Air dry/ Force dry/ Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7605-K-80

Polychem 7605-K-80 (Z8625)

Polychem 7605-K-80 is an short oil soya based chain stopped alkyd cut to 80% in methyl propyl ketone. 7605 is a HAPS Free version of 7212. It is useful in air dry, force dry or bake enamels, and is designed to have flexibility and adhesion. It dries in heavy films comparable to a conventional solids short to medium alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z-Z3
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 9 ± 0.1
Solvent Methyl Propyl Ketone/100 Solvent
Modifier
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 60
Reduction Solvent Xylene
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels
Bake enamels with melamine

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Zirconium 0.4%
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged