Water Reducible Resins

POLYCHEM 7641-EB-70

Polychem 7641-EB-70 (Z8777)

Polychem 7641-EB-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is an EB cut of 7588 and HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent Ethylene Glycol Monobutylether
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity clear to slightly hazy

 

SUGGESTED USES
Air dry/ Force dry/ Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7497-PP-70

Polychem 7497-PP-70 (Z8078)

Polychem 7497-PP-70 is an styrenated epoxy ester which can be formulated into water based metal primer and top coats, both air dry and baking systems. The polymer is cut in propylene glycol n-propyl ether and the composition is HAP FREE. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z5-Z7
Acid Number 50 to 60
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Propylene Glycol Mono-Propylether
Modifier STY/EPOXY
Oil Tall Oil Fatty Acid
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent Propylene Glycol Mono-Propylether
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Dri-Rx 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7535-70

Polychem 7535-70 (Z8222T)

Polychem 7535-70 is an water dispersible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 34 to 42
Gardner Color 7 Maximum
Weight Per Gallon 8.7 ± 0.1
Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity W-Z
Reduced NVM 30
Reduction Solvent water
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air Dry / Force Dry / Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7588-PP-70

Polychem 7588-PP-70 (Z8520)

Polychem 7588-PP-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.95 ± 0.1
Solvent Propylene Glycol Mono-Propylether/Sec Butanol
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air Dry / Force Dry / Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7579-PP-75

Polychem 7579-PP-75 (Z8442)

Polychem 7579-PP-75 is an HAPS free water reducible phenolic modified alkyd used for primers. This primer vehicle offers good salt spray resistance, hot alkali, and hot oil resistance with good stability and fast recoat capability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 33 to 42
Gardner Color 10 Maximum
Weight Per Gallon 8.85 ± 0.1
Solvent Propylene Glycol Mono-Propylether
Modifier Phenolic
Oil Mix of Oxidizing Oils
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
VOC Compliant primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.10%
Calcium 0.15%
Zirconium 0.15%
Manganese 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,