POLYCHEM G2505-MS16-70

Polychem G2505-MS16-70 (Z2027)

Polychem G2505-MS16-70 is an long oil Soya alkyd. It is a general-purpose gloss air dry enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent MS16 / HiSol 10
Modifier
Oil Soybean Oil
Reduced Viscosity Q-U
Reduced NVM 60
Reduction Solvent MS16
Clarity Clear

 

SUGGESTED USES
This resin is designed for use in enamels where low VOC is required. Used for high quality interior or exterior architectural gloss and trim enamels. Also used in many industrial finishes such as machinery enamels, freight and marine paints, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5-6 Hours

Driers:
Cobalt 0.06%
Calcium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
This entry was posted in Long Oil Alkyds and tagged , . Bookmark the permalink.

Comments are closed.