OPC Logo

Polychem G7794-X-50 (Z2158)

Polychem G7794-X-50 is an chain stopped short oil oxidizing alkyd. It offers a very fast tack time, slow cutting curve and excellent hardness. It also has good gloss with exterior durability when used with air dry enamels.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity D-F
Reduced NVM 34
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used for air dry and baking industrial applications, as well as melamine modified enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 10-20 mins.
Hard

Driers:
Cobalt 0.06%
Calcium 0.2%
Zirconium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

Copyright © 2013 OPC Polymers. All rights reserved.

Printed from http://www.opcpolymers.com on 3/28/2024