Architectural

POLYCHEM G7790-MS7-60

Polychem G7790-MS7-60 (Z2152)

Polychem G7790-MS7-60 is an product designed to be used in a low odor architectural system. It also provides excellent gloss and color retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z3-Z4
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 7.83 ± 0.1
Solvent MS-7
Modifier –
Oil Soybean Oil
Reduced Viscosity S-V
Reduced NVM 50
Reduction Solvent MS7
Clarity Clear

 

SUGGESTED USES
Low odor architectural coating.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5 – 6 Hours
Driers:
Cobalt 0.04%
Calcium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G2507-OMS-70

Polychem G2507-OMS-70 (Z2033)

Polychem G2507-OMS-70 is an general purpose gloss air drying enamel vehicle with excellent resistance to yellowing on aging. This resin is designed for use in enamels where low V.O.C. is required.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z3-Z5
Acid Number 14
Gardner Color 8 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Odorless Mineral Spirits
Modifier –
Oil Soybean Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent Odorless Mineral Spirits
Clarity Clear

 

SUGGESTED USES
Used for high quality exterior gloss and trim enamels. Also used in many industrial finishes such as machinery enamels, freight and marine paints, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5-6 hrs.
Driers:
Cobalt 0.06%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G2504HV-MS16-60

Polychem G2504HV-MS16-60 (Z2000)

Polychem G2504HV-MS16-60 is an general purpose gloss air drying enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.76 ± 0.1
Solvent MS-16
Modifier –
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 50
Reduction Solvent MS-16
Clarity clear

 

SUGGESTED USES
Used for high quality interior or exterior architectural gloss and trim enamels. Also used in many industrial finishes such as machinery enamels, freight and marine paints, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5-6 hrs.
Driers:
Cobalt 0.04%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7657-TBA-60

Polychem 7657-TBA-60 (Z8835)

Polychem 7657-TBA-60 is an medium oil Soya alkyd designed specifically for applications where fast dry is of importance. This product is low-VOC and is a t-Butyl Acetate cut version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H P-T
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil Soybean Oil
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Traffic Paint
Farm and Implement Enamels
General Metal Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.05%
Manganese 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7662-100

Polychem 7662-100 (Z8850)

Polychem 7662-100 is an long oil soya alkyd designed for use with latex in exterior house paints. It is recommended to be used in the 20% resin solids range to improve adhesion and water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 8.51 ± 0.1
Solvent –
Modifier –
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 70
Reduction Solvent ms
Clarity 10 max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7577-KD-65

Polychem 7577-KD-65 (Z8434)

Polychem 7577-KD-65 is an VT modified Linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of great than 100F, but at the same time allowing for faster dry than standard mineral spirits cuts.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 13
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity C-E
Reduced NVM 45
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7574-M-70

Polychem 7574-M-70 (Z8292)

Polychem 7574-M-70 is an long oil soya alkyd useful for brush enamels and as a modifier to achieve lower VOC.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H V-W
Acid Number 8
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity G-J
Reduced NVM 60
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7559-M-75

Polychem 7559-M-75 (Z8262)

Polychem 7559-M-75 is an high solids long oil alkyd designed to provide enamels meeting 350 grams/liter VOC with excellent non-yellowing characteristics. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.25 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity O-Q
Reduced NVM 60
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR

 

SUGGESTED USES
Architectural enamels
Trim and trellis paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06
Calcium 0.04
Zirconium 0.50
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7549-M-90

Polychem 7549-M-90 (Z8249)

Polychem 7549-M-90 is an high solids long oil alkyd designed as a modifying resin for VOC compliant enamels to meet the AIM limits of 380g/l for nonflat coatings. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Sunflower Oil
Reduced Viscosity H-K
Reduced NVM 65
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Blend vehicle for architectural or general industrial enamels to reduce the VOC of other conventional resins.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
Zirconium 0.30%
Dri-Rx 0.1
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7260-V-60

Polychem 7260-V-60 (Z7832)

Polychem 7260-V-60 is an medium soya alkyd designed for fast drying traffic paints.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z3-Z5
Acid Number 9
Gardner Color 5 Maximum
Weight Per Gallon 7.85 ± 0.1
Solvent VM&P
Modifier –
Oil Soybean Oil
Reduced Viscosity G-I
Reduced NVM 45
Reduction Solvent VM&P
Clarity 10 MAX

 

SUGGESTED USES
Traffic Paints
Implement Enamels
General Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Magnesium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,