OEM

POLYCHEM 7635-T-BA-60

Polychem 7635-T-BA-60 (Z8747)

Polychem 7635-T-BA-60 is an short linseed/rosin/phenolic modified oxidizing alkyd which offers lift resistance and fast dry. This is the same as OPC 7348-X-50 but reduced in t-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 15 to 25
Gardner Color 12 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity P-S
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 max

 

SUGGESTED USES
Primers and surfacers
Fast drying enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7675-X-90

Polychem 7675-X-90 (Z8887)

Polychem 7675-X-90 is an high solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-VOC and can be formulated into low-VOC coatings where HAP-free is not a necessity.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z4-Z6
Acid Number 10
Gardner Color 12 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity U-Y
Reduced NVM 80
Reduction Solvent Xylene
Clarity 10 max

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7648-tBA-65

Polychem 7648-tBA-65 (Z8807)

Polychem 7648-tBA-65 is an castor based plasticizing alkyd useful in nitrocellulose lacquers and baked enamels in combination with aminoplast resins. This is a tBAc cut version of 7562-X-65.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H V-Y
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil CASTOR
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity 20 MAX

 

SUGGESTED USES
Lacquer plasticizer
Bake finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7641-EB-70

Polychem 7641-EB-70 (Z8777)

Polychem 7641-EB-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is an EB cut of 7588 and HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent Ethylene Glycol Monobutylether
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity clear to slightly hazy

 

SUGGESTED USES
Air dry/ Force dry/ Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7562-X-65

Polychem 7562-X-65 (Z8266)

Polychem 7562-X-65 is an castor based plasticizing alkyd useful in nitrocellulose lacquers and baked enamels in combination with aminoplast resins.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H X-Z
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier –
Oil CASTOR
Reduced Viscosity J-N
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Lacquer plasticizer
Bake finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7556-10-80

Polychem 7556-10-80 (Z8252)

Polychem 7556-10-80 is an universal dispersion resin providing compatibility with both trade sale and industrial coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H S-V
Acid Number 10
Gardner Color 13 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-H
Reduced NVM 70
Reduction Solvent 100 Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7497-PP-70

Polychem 7497-PP-70 (Z8078)

Polychem 7497-PP-70 is an styrenated epoxy ester which can be formulated into water based metal primer and top coats, both air dry and baking systems. The polymer is cut in propylene glycol n-propyl ether and the composition is HAP FREE. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z5-Z7
Acid Number 50 to 60
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Propylene Glycol Mono-Propylether
Modifier STY/EPOXY
Oil Tall Oil Fatty Acid
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent Propylene Glycol Mono-Propylether
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Dri-Rx 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7478-X-75

Polychem 7478-X-75 (Z8066)

Polychem 7478-X-75 is an phenolic modified alkyd supplied at 75% solids in xylene. Excellent choice for specialty coatings, especially non-lifting primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 12 to 24
Gardner Color 15 Maximum
Weight Per Gallon 8.65 ± 0.1
Solvent Xylene
Modifier Phenolic
Oil Linseed Oil/TUNG Oil/Tall Oil Fatty Acid
Reduced Viscosity N-Q
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Industrial primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.08%
Calcium 0.20%
Zirconium 0.30%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7460-V-60

Polychem 7460-V-60 (Z8060)

Polychem 7460-V-60 is an rosin modified epoxy ester designed for industrial and trade sales applications, providing high alkali, water, and solvent resistance. 7460-V-60 is based on the same resin solids as 7360-M-60, but reduced in VM&P NAPHTHA for applications, where a solvent with higher evaporation rate is desired. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H W-Y
Acid Number 7
Gardner Color 7 Maximum
Weight Per Gallon 7.5 ± 0.1
Solvent VM&P
Modifier Rosin Modified
Oil Tall Oil Fatty Acid
Reduced Viscosity O-U
Reduced NVM 50
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7449-10-50

Polychem 7449-10-50 (Z8049)

Polychem 7449-10-50 is an epoxy ester based upon tall oil fatty acid which can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H P-U
Acid Number 2
Gardner Color 6 Maximum
Weight Per Gallon 8 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,