Long Oil Alkyds

POLYCHEM 7536-M-70

Polychem 7536-M-70 (Z8224)

Polychem 7536-M-70 is an long oil soya alkyd designed to meet TTR-266, Type I, Class A specification. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Architectural Enamels
Exterior Trim Paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7052-M-70

Polychem 7052-M-70 (Z3590)

Polychem 7052-M-70 is an non-yellowing long oil TOFA alkyd providing good compatibility with oils, resins, and chlorinated rubber. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity E-H
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Architectural enamels
Trim and trellis paints
Utility enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 6891-M-60

Polychem 6891-M-60 (Z2964-M)

Polychem 6891-M-60 is an high viscosity long oil alkyd providing excellent gloss retention and durability. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z4-Z6
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 7.7 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity J-L
Reduced NVM 45
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity Clear

 

SUGGESTED USES
Enamels
Trim Paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 6502-100

Polychem 6502-100 (Z2428)

Polychem 6502-100 is an pure long oil alkyd formulated especially for the modification of latex house paints or other exterior latex coating applications where chalk binding, flexibility, and adhesion are necessary to augment the properties of a latex system. The modification level is typically 25% based upon total resin solids. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99.5
Viscosity, G-H W-Y
Acid Number 10
Gardner Color 10 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent –
Modifier –
Oil Linseed Oil
Reduced Viscosity B-D
Reduced NVM 70
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Manganese 0.03%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6831-100

Polychem 6831-100 (Z2758)

Polychem 6831-100 is an long oil soya / isophthalic alkyd designed for use with latex in exterior house paints. It is recommended to be used in the 20% resin solids range to improve adhesion and water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent –
Modifier –
Oil Soybean Oil
Reduced Viscosity B-D
Reduced NVM 70
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged