OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

Wood

POLYCHEM 7752-OX-70

Polychem 7752-OX-70 (Z2311)

Polychem 7752-OX-70 is an long oil linseed alkyd with quick drying ability. It is formulated for use VOC free coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 9.27 ± 0.1
Solvent Oxsol 100
Modifier
Oil Linseed Oil
Reduced Viscosity R-V
Reduced NVM 55
Reduction Solvent Oxsol 100
Clarity CLEAR

 

SUGGESTED USES
Used as a general-purpose stain vehicle.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06%
Calcium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6010-M-70

Polychem 6010-M-70 (Z6010)

Polychem 6010-M-70 is an HAPs free, high rosin TOFA alkyd designed as a universal dispersion resin. It has compatibility with both trade sale and industrial coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H R-V
Acid Number 28 to 36
Gardner Color 11 Maximum
Weight Per Gallon 8.05 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil High Rosin TOFA
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity 10 MAX

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 3280-M-90

Polychem 3280-M-90 (Z3280)

Polychem 3280-M-90 is an Linseed alkyd designed as a universal dispersion resin. It has compatibility with both trade sale and industrial coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H R-V
Acid Number 10
Gardner Color 8 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil Linseed Oil
Reduced Viscosity D-G
Reduced NVM 75
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7692-X-65

Polychem G7692-X-65 (Z2105)

Polychem G7692-X-65 is an medium oil semi-oxidizing alkyd. It has good adhesion. When used as a plasticizer for nitrocellulose lacquers it imparts cold check resistance, adhesion, toughness, and recoatability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H X-Z
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity H-L
Reduced NVM 55
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers. Also, it can be used with melamine-formaldehyde resins in baking enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
None.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7711-BA-70

Polychem 7711-BA-70 (Z8963)

Polychem 7711-BA-70 is an HAPs free coconut short oil alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity Q-T
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM G7741HV-X-70

Polychem G7741HV-X-70 (Z2114)

Polychem G7741HV-X-70 is an glyptal short oil non-drying alkyd. It has low viscosity, excellent compatibility, adequate hardness, good sanding lacquers and very good flexibility giving excellent cold check results. Color and color retention are of the highest order.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 3 Maximum
Weight Per Gallon 8.8 ± 0.1
Solvent Xylene
Modifier
Oil Coconut Oil
Reduced Viscosity H-L
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers for wood furniture.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry: 25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7637-TBA-65

Polychem 7637-TBA-65 (Z8755)

Polychem 7637-TBA-65 is an short coconut alkyd solution for use as a baking vehicle in combination with amnioplast resins or as a plasticizer for lacquers. This is a t-Butyl Acetate version of 7610 and is used to formulate very low VOC coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Baking Enamels
Plasticizer for Lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7700-X-60

Polychem 7700-X-60 (Z8949)

Polychem 7700-X-60 is an medium oil alkyd formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H V-X
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 8.43 ± 0.1
Solvent Xylene
Modifier
Oil Soybean Oil
Reduced Viscosity F-I
Reduced NVM 50
Reduction Solvent xylene
Clarity 10 max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7648-tBA-65

Polychem 7648-tBA-65 (Z8807)

Polychem 7648-tBA-65 is an castor based plasticizing alkyd useful in nitrocellulose lacquers and baked enamels in combination with aminoplast resins. This is a tBAc cut version of 7562-X-65.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H V-Y
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil CASTOR
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity 20 MAX

 

SUGGESTED USES
Lacquer plasticizer
Bake finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7562-X-65

Polychem 7562-X-65 (Z8266)

Polychem 7562-X-65 is an castor based plasticizing alkyd useful in nitrocellulose lacquers and baked enamels in combination with aminoplast resins.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H X-Z
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier
Oil CASTOR
Reduced Viscosity J-N
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Lacquer plasticizer
Bake finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,