OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

OEM

POLYCHEM 7753-BA-60

Polychem 7753-BA-60 (Z2313)

Polychem 7753-BA-60 is an HAPs free fast drying acrylic modified alkyd. Used in applications where good flexibility and gloss / color retention are desired.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 5 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent n Butyl Acetate
Modifier ACR
Oil Dehydrated Castor Oil
Reduced Viscosity Q-T
Reduced NVM 50
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Farm Implement / Equipment
Metal Product Finishes
Bake Enamels with melamines and ureas

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Calcium 0.03%
Zirco 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7739-B-75

Polychem 7739-B-75 (Z8995)

Polychem 7739-B-75 is an low HAPs, high solids, chain-stopped, short oil alkyd. It provides fast dry, high gloss and good corrosion resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent n-BA & MPK
Modifier
Oil Soya / Dehydrated Castor Oil
Reduced Viscosity G-K
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Implement Enamels
Industrial Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7733-X-50

Polychem 7733-X-50 (Z8989)

Polychem 7733-X-50 is an siliconized epoxy ester. It possesses good adhesion, chemical and high heat resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H U-X
Acid Number 10
Gardner Color 8 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Xylene
Modifier SILICONE
Oil Tall Oil Fatty Acid
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Air and Bake Coatings
Maintenance Coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7728-10-50

Polychem 7728-10-50 (Z8984)

Polychem 7728-10-50 is an Hi-Sol 10 version of Polychem 6841-X-50.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent 100 Solvent
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity H-L
Reduced NVM 40
Reduction Solvent 100 Solvent
Clarity 5 Max

 

SUGGESTED USES
Air dry or short bake industrial enamels
Conversion varnishes
Primers and shop coats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7692-X-65

Polychem G7692-X-65 (Z2105)

Polychem G7692-X-65 is an medium oil semi-oxidizing alkyd. It has good adhesion. When used as a plasticizer for nitrocellulose lacquers it imparts cold check resistance, adhesion, toughness, and recoatability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H X-Z
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity H-L
Reduced NVM 55
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers. Also, it can be used with melamine-formaldehyde resins in baking enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
None.
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7711-BA-70

Polychem 7711-BA-70 (Z8963)

Polychem 7711-BA-70 is an HAPs free coconut short oil alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity Q-T
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM G7741HV-X-70

Polychem G7741HV-X-70 (Z2114)

Polychem G7741HV-X-70 is an glyptal short oil non-drying alkyd. It has low viscosity, excellent compatibility, adequate hardness, good sanding lacquers and very good flexibility giving excellent cold check results. Color and color retention are of the highest order.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 3 Maximum
Weight Per Gallon 8.8 ± 0.1
Solvent Xylene
Modifier
Oil Coconut Oil
Reduced Viscosity H-L
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers for wood furniture.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry: 25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7808-X-50

Polychem G7808-X-50 (Z2179)

Polychem G7808-X-50 is an glyptal short phenolic/rosin modified alkyd. It has good water and chemical resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H U-W
Acid Number 16
Gardner Color 9 Maximum
Weight Per Gallon 8.25 ± 0.1
Solvent Xylene
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity E-H
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used for quick-dry lift resistant primers with good corrosion resistance.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers (% Metal on Solids)
Cobalt 0.04%
Calcium 0.3%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7637-TBA-65

Polychem 7637-TBA-65 (Z8755)

Polychem 7637-TBA-65 is an short coconut alkyd solution for use as a baking vehicle in combination with amnioplast resins or as a plasticizer for lacquers. This is a t-Butyl Acetate version of 7610 and is used to formulate very low VOC coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Baking Enamels
Plasticizer for Lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7789-X-60

Polychem G7789-X-60 (Z2149)

Polychem G7789-X-60 is an short oil oxidizing alkyd. It is a general-purpose vehicle offering very good hardness, flexibility and color and gloss retention. It also has very good detergent resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 8
Gardner Color 5 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity P-U
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Use for industrial baking enamels and primers. It can also be used for all appliance finishes except those requiring the ultimate in color retention and detergent resistance.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,