Rosin and Phenolic Modified Alkyds

POLYCHEM 7741-X-60

Polychem 7741-X-60 (Z8997)

Polychem 7741-X-60 is an short oil phenolic modified soya alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H X-Z1
Acid Number 10
Gardner Color 10 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent Xylene
Modifier Phenolic
Oil Soybean Oil
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Interior or exterior paint.
Air or Force Dry.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

POLYCHEM G7808-X-50

Polychem G7808-X-50 (Z2179)

Polychem G7808-X-50 is an glyptal short phenolic/rosin modified alkyd. It has good water and chemical resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H U-W
Acid Number 16
Gardner Color 9 Maximum
Weight Per Gallon 8.25 ± 0.1
Solvent Xylene
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity E-H
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used for quick-dry lift resistant primers with good corrosion resistance.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers (% Metal on Solids)
Cobalt 0.04%
Calcium 0.3%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7635-T-BA-60

Polychem 7635-T-BA-60 (Z8747)

Polychem 7635-T-BA-60 is an short linseed/rosin/phenolic modified oxidizing alkyd which offers lift resistance and fast dry. This is the same as OPC 7348-X-50 but reduced in t-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 15 to 25
Gardner Color 12 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity P-S
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 max

 

SUGGESTED USES
Primers and surfacers
Fast drying enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7478-X-75

Polychem 7478-X-75 (Z8066)

Polychem 7478-X-75 is an phenolic modified alkyd supplied at 75% solids in xylene. Excellent choice for specialty coatings, especially non-lifting primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 12 to 24
Gardner Color 15 Maximum
Weight Per Gallon 8.65 ± 0.1
Solvent Xylene
Modifier Phenolic
Oil Linseed Oil/TUNG Oil/Tall Oil Fatty Acid
Reduced Viscosity N-Q
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Industrial primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.08%
Calcium 0.20%
Zirconium 0.30%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7348-X-50

Polychem 7348-X-50 (Z7972)

Polychem 7348-X-50 is an short linseed/rosin/phenolic modified oxidizing alkyd which offers lift resistance and fast dry.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H W-Y
Acid Number 15 to 25
Gardner Color 10 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity G-K
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Primers and surfacers
Fast drying enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Nuxtra Utd 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6671-VX-50

Polychem 6671-VX-50 (Z6031)

Polychem 6671-VX-50 is an phenolic modified short oil soya alkyd resin solution. It produces tough, flexible films having water and corrosion resistance, providing the formulator an alkyd with proven durability in both air dry and bake applications. It is recommended for industrial product finishes, and in industrial air-dry maintenance paints.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H W-Y
Acid Number 16
Gardner Color 12 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent VM&P / Xylene
Modifier Phenolic
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Meets requirements of vehicle for TT-E-485, TYPE IV

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7478-B-79

Polychem 7478-B-79 (Z8069)

Polychem 7478-B-79 is an phenolic modified alkyd supplied at 79% solids in a HAP-FREE solvent blend. Excellent choice for specialty coatings, especially non-lifting primers. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 79
Viscosity, G-H Z2-Z4
Acid Number 12 to 24
Gardner Color 15 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent 100 Solvent/Methyl Propyl Ketone/PM Acetate
Modifier Phenolic
Oil Linseed Oil/TUNG Oil/Tall Oil Fatty Acid
Reduced Viscosity E-H
Reduced NVM 65
Reduction Solvent Methyl Propyl Ketone
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Industrial Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06%
Calcium 0.20%
Zirconium 0.30%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,