OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

Compliant Resins

POLYCHEM 7760-BA-70

Polychem 7760-BA-70 (Z2323)

Polychem 7760-BA-70 is an medium soya chain stopped alkyd cut to 70% in n-BA. Designed for fast air dry or low bake finishes, it is the HAPs free version of 7738-X-65.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.65 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity E-I
Reduced NVM 50
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
General purpose industrial finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7752-OX-70

Polychem 7752-OX-70 (Z2311)

Polychem 7752-OX-70 is an long oil linseed alkyd with quick drying ability. It is formulated for use VOC free coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 9.27 ± 0.1
Solvent Oxsol 100
Modifier
Oil Linseed Oil
Reduced Viscosity R-V
Reduced NVM 55
Reduction Solvent Oxsol 100
Clarity CLEAR

 

SUGGESTED USES
Used as a general-purpose stain vehicle.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06%
Calcium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7745-DMC-75

Polychem 7745-DMC-75 (Z2303)

Polychem 7745-DMC-75 is an medium oil soya alkyd designed specifically for appications where fast dry is of importance. This product is a high solids, low-VOC version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent Di-Methyl Carbonate
Modifier
Oil Soybean Oil
Reduced Viscosity D-G
Reduced NVM 55
Reduction Solvent Di-Methyl Carbonate
Clarity Clear

 

SUGGESTED USES
Traffic Paint
Farm and implement enamels
General metal primers and topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
Manganese 0.003%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7739-B-75

Polychem 7739-B-75 (Z8995)

Polychem 7739-B-75 is an low HAPs, high solids, chain-stopped, short oil alkyd. It provides fast dry, high gloss and good corrosion resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent n-BA & MPK
Modifier
Oil Soya / Dehydrated Castor Oil
Reduced Viscosity G-K
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Implement Enamels
Industrial Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7734-BA-75

Polychem 7734-BA-75 (Z8990)

Polychem 7734-BA-75 is an low HAPS Coconut Short oil alkyd supplied at 75% solids in n-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z3
Acid Number 22 to 28
Gardner Color 4 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity E-I
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Polychem 7734 is ideal for light color and clear furniture varnishes as well as non-yellowing high bake enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

POLYCHEM 7726-TBA-70

Polychem 7726-TBA-70 (Z8982)

Polychem 7726-TBA-70 is an VOC exempt (Except CA) medium oil alkyd. It is formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.7 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity S-W
Reduced NVM 60
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03 %
Calcium 0.03 %
Zirconium 0.30 %
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7724-TBA-75

Polychem 7724-TBA-75 (Z8980)

Polychem 7724-TBA-75 is an short oil soya based chain stopped alkyd cut to 75% in t-butyl acetate. 7724 is a HAPS Free version of 7212 in an VOC exempt solvent. It is useful in air dry, force dry or bake enamels, and is designed to have flexibility and adhesion. It dries in heavy films comparable to a conventional solids short to medium alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 8.91 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity H-K
Reduced NVM 60
Reduction Solvent t-Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels
Bake enamels with melamine

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Zirconium 0.4%
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7687-OX-60

Polychem 7687-OX-60 (Z8978)

Polychem 7687-OX-60 is an premium siliconized alkyd designed to produce durable high gloss air dry finishes. Reduced in Oxsol 100 and can be formulated into a HAP-free coating.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H V-Y
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 9.95 ± 0.1
Solvent Oxsol 100
Modifier SILICONE
Oil Soybean Oil
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity 10 MAX

 

SUGGESTED USES
Transportation equipment enamels
Exterior maintenance coatings
Outdoor signs

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Manganese 0.04%
Calcium 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7711-BA-70

Polychem 7711-BA-70 (Z8963)

Polychem 7711-BA-70 is an HAPs free coconut short oil alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity Q-T
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7634-TBA-60

Polychem 7634-TBA-60 (Z8745)

Polychem 7634-TBA-60 is an premium fast drying acrylic modified alkyd for applications where good flexibility and gloss/color retention are desired. This is a t-Butyl Acetate cut version of 7459-X-50.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 14
Gardner Color 4 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier ACR
Oil Dehydrated Castor Oil
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 5 max

 

SUGGESTED USES
Farm Implement/Equipment
Metal Product Finishes
Bake Enamels with Melamines and Ureas

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Nuxtra 0.02%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged