OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

Medium Oil Alkyds

POLYCHEM 7760-BA-70

Polychem 7760-BA-70 (Z2323)

Polychem 7760-BA-70 is an medium soya chain stopped alkyd cut to 70% in n-BA. Designed for fast air dry or low bake finishes, it is the HAPs free version of 7738-X-65.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.65 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity E-I
Reduced NVM 50
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
General purpose industrial finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7745-DMC-75

Polychem 7745-DMC-75 (Z2303)

Polychem 7745-DMC-75 is an medium oil soya alkyd designed specifically for appications where fast dry is of importance. This product is a high solids, low-VOC version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent Di-Methyl Carbonate
Modifier
Oil Soybean Oil
Reduced Viscosity D-G
Reduced NVM 55
Reduction Solvent Di-Methyl Carbonate
Clarity Clear

 

SUGGESTED USES
Traffic Paint
Farm and implement enamels
General metal primers and topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
Manganese 0.003%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7738-X-65

Polychem 7738-X-65 (Z8994)

Polychem 7738-X-65 is an medium soya chain stopped alkyd cut to 65% in xylene, designed for fast air dry or low bake finishes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z2-Z4
Acid Number 9
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier
Oil Soybean Oil
Reduced Viscosity H-K
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
General purpose industrial finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7726-TBA-70

Polychem 7726-TBA-70 (Z8982)

Polychem 7726-TBA-70 is an VOC exempt (Except CA) medium oil alkyd. It is formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.7 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Soybean Oil
Reduced Viscosity S-W
Reduced NVM 60
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03 %
Calcium 0.03 %
Zirconium 0.30 %
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G2510-MS16-50

Polychem G2510-MS16-50 (Z2039)

Polychem G2510-MS16-50 is an glyptal medium oil alkyd. It is a general purpose vehicle for brushing or spraying enamels and primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent MS-16
Modifier
Oil Soybean Oil
Reduced Viscosity G-J
Reduced NVM 40
Reduction Solvent MS-16
Clarity 10 Max

 

SUGGESTED USES
Used for lighter colors or low bake applications, and for dipping enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 4-6 hrs.
Hard
Driers
Cobalt 0.04%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7830-B-84

Polychem G7830-B-84 (Z2204)

Polychem G7830-B-84 is an medium oil semi-oxidizing alkyd. It is high solids.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 84
Viscosity, G-H Z4.5-Z6
Acid Number 18 to 30
Gardner Color 6 Maximum
Weight Per Gallon 9 ± 0.1
Solvent DOWANOL PM / ETHANOL
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity Clear

 

SUGGESTED USES
Used in conjunction with amino resins to form high solid acid curing finishes free from aromatic solvents.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
N/A
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7764-X-60

Polychem G7764-X-60 (Z2129)

Polychem G7764-X-60 is an product with good durability, excellent adhesion, good gloss retention and abrasion resistance. It is a fast air drying and baking vehicle.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 16 to 25
Gardner Color 9 Maximum
Weight Per Gallon 8.45 ± 0.1
Solvent Xylene
Modifier
Oil Linseed Oil
Reduced Viscosity P-U
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used in metal primers, implement enamels, lacquer primers, and automotive primers.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers:
Cobalt 0.02%
Calcium 0.2%
Zirconium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7725-B-45

Polychem G7725-B-45 (Z2111)

Polychem G7725-B-45 is an glyptal traffic paint alkyd. It has excellent bleed resistance and rapid set up.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 45
Viscosity, G-H Z1-Z2
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 7.37 ± 0.1
Solvent Blend
Modifier
Oil Linseed Oil / Soybean Oil
Reduced Viscosity H-K
Reduced NVM 35
Reduction Solvent VM&P
Clarity CLEAR

 

SUGGESTED USES
Used for traffic paints and industrial primers.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry 3-5 mins.
Tack Free 4-5 hrs.
Hard

Driers:
Cobalt 0.04%
Calcium 0.2%
Zirconium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7773-MS16-50

Polychem G7773-MS16-50 (Z2138)

Polychem G7773-MS16-50 is an medium oil Soya-Tung alkyd. It offers excellent exterior durability. It also has very good gloss and color retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent MS-16
Modifier
Oil Soya/Tung Oil
Reduced Viscosity Q-U
Reduced NVM 40
Reduction Solvent MS16
Clarity CLEAR

 

SUGGESTED USES
Used for farm implement and industrial finishing enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 3-4 Hours
Hard 6 Hours

Driers:
Cobalt 0.05%
Calcium 0.25%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7800-V-50

Polychem G7800-V-50 (Z2170)

Polychem G7800-V-50 is an glyptal paint traffic alkyd. It has excellent bleed resistance, rapid set up and good performance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z4-Z6
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 7.5 ± 0.1
Solvent VM&P
Modifier
Oil Linseed Oil / Soybean Oil
Reduced Viscosity R-V
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR

 

SUGGESTED USES
Used for traffic paints or industrial primers and fast evaporating enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry 3-5 Minutes
Tack Free 4-5 Hours
Hard

Driers
Cobalt 0.04%
Calcium 0.2%
Zirconium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged