Aerosol

POLYCHEM 7753-BA-60

Polychem 7753-BA-60 (Z2313)

Polychem 7753-BA-60 is an HAPs free fast drying acrylic modified alkyd. Used in applications where good flexibility and gloss / color retention are desired.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 5 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent n Butyl Acetate
Modifier ACR
Oil Dehydrated Castor Oil
Reduced Viscosity Q-T
Reduced NVM 50
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Farm Implement / Equipment
Metal Product Finishes
Bake Enamels with melamines and ureas

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Calcium 0.03%
Zirco 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7745-DMC-75

Polychem 7745-DMC-75 (Z2303)

Polychem 7745-DMC-75 is an medium oil soya alkyd designed specifically for appications where fast dry is of importance. This product is a high solids, low-VOC version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 8 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent Di-Methyl Carbonate
Modifier –
Oil Soybean Oil
Reduced Viscosity D-G
Reduced NVM 55
Reduction Solvent Di-Methyl Carbonate
Clarity Clear

 

SUGGESTED USES
Traffic Paint
Farm and implement enamels
General metal primers and topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
Manganese 0.003%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7724-TBA-75

Polychem 7724-TBA-75 (Z8980)

Polychem 7724-TBA-75 is an short oil soya based chain stopped alkyd cut to 75% in t-butyl acetate. 7724 is a HAPS Free version of 7212 in an VOC exempt solvent. It is useful in air dry, force dry or bake enamels, and is designed to have flexibility and adhesion. It dries in heavy films comparable to a conventional solids short to medium alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z3-Z5
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 8.91 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil Soybean Oil
Reduced Viscosity H-K
Reduced NVM 60
Reduction Solvent t-Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels
Bake enamels with melamine

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Zirconium 0.4%
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7700-X-60

Polychem 7700-X-60 (Z8949)

Polychem 7700-X-60 is an medium oil alkyd formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H V-X
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 8.43 ± 0.1
Solvent Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity F-I
Reduced NVM 50
Reduction Solvent xylene
Clarity 10 max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7683-B-80

Polychem 7683-B-80 (Z8919)

Polychem 7683-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z3-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity F-L
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX @80% NVM
0 MAX @ 70% NVM

 

SUGGESTED USES
Farm implements/equipment
Metal Product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7577-KD-65

Polychem 7577-KD-65 (Z8434)

Polychem 7577-KD-65 is an VT modified Linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of great than 100F, but at the same time allowing for faster dry than standard mineral spirits cuts.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 13
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity C-E
Reduced NVM 45
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7565-B-60

Polychem 7565-B-60 (Z8265)

Polychem 7565-B-60 is an acrylic-VT modified alkyd, combining the fast dry properties of VT alkyds with improved durability. This resin is cut in a combination of mineral spirits and Solvent 100 to achieve a flashpoint of 100°F minimum.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 8
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Mineral Spirits/100 Solvent
Modifier VT/ ACR
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 8-6693-V-60

Polychem 8-6693-V-60 (Z0184-1)

Polychem 8-6693-V-60 is an fast drying vinyl toluene alkyd that achieves durable high gloss finishes with exceptional water and solvent resistance. It exhibits excellent surface wetting and adhesion combined with the usual fast set and dry of a vinyl toluene alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7445-V-75

Polychem 7445-V-75 (Z8098)

Polychem 7445-V-75 is an high solids vinyl toluene modified alkyd supplied at 75% in VM&P Naptha.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z2
Acid Number 5 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 60
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Wood finishes
Aerosol coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Calcium 0.20%
Zirconium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7563-V-60

Polychem 7563-V-60 (Z0777)

Polychem 7563-V-60 is an vinyl toluene copolymer designed for use in primers, enamels, aerosols, and sanding sealers where lacquer type dry is required. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 4
Gardner Color 5 Maximum
Weight Per Gallon 7.4 ± 0.1
Solvent VM&P
Modifier VT
Oil Linseed Oil
Reduced Viscosity C-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Equipment enamels
Floor sealers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,