OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

High Solids Monomer Modified Alkyds

POLYCHEM 7683-B-80

Polychem 7683-B-80 (Z8919)

Polychem 7683-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z3-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity F-L
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX @80% NVM
0 MAX @ 70% NVM

 

SUGGESTED USES
Farm implements/equipment
Metal Product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7445-V-75

Polychem 7445-V-75 (Z8098)

Polychem 7445-V-75 is an high solids vinyl toluene modified alkyd supplied at 75% in VM&P Naptha.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z2
Acid Number 5 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 60
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Wood finishes
Aerosol coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Calcium 0.20%
Zirconium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7519-B-70

Polychem 7519-B-70 (Z8126)

Polychem 7519-B-70 is an styrene/acrylic modified alkyd designed for air dry, force dry, or bake finishes providing a good degree of flexibility and good projected durability / color retention. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H W-Z
Acid Number 14
Gardner Color 5 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent BLEND
Modifier ACR
Oil Soybean Oil/Sunflower Oil
Reduced Viscosity E-G
Reduced NVM 60
Reduction Solvent METHYL n-PROPYL KETONE MPK
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7447-BA-80

Polychem 7447-BA-80 (Z8042)

Polychem 7447-BA-80 is an very fast air drying vinyl toluene copolymer resin supplied at 80% solids in n-butyl acetate. It is useful as the binder in aerosol formulations, industrial enamels and sanding sealers. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent n Butyl Acetate
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosol coatings
Wood finishes
Sanding sealers
Industrial enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Zirconium 0.20%
Calcium 0.02%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7447-X-80

Polychem 7447-X-80 (Z8041)

Polychem 7447-X-80 is an very fast air drying vinyl toluene co-polymer resin supplied at 80% solids in xylene. It is useful as the binder in aerosol formulations, industrial enamels and sanding sealers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosol coatings
Wood finishes
Sanding sealers
Industrial enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Zirconium 0.20%
Calcium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM OP 7655-KD-75

Polychem OP 7655-KD-75 (Z2315)

Polychem OP 7655-KD-75 is an high solids VT oil reduced in narrow cut mineral spirits.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z3
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity J-M
Reduced NVM 60
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
Stain Stopping Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7581-B-80

Polychem 7581-B-80 (Z8462)

Polychem 7581-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good projected durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z5-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity E-G
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,