Monomer Modified Alkyds

POLYCHEM 7753-BA-60

Polychem 7753-BA-60 (Z2313)

Polychem 7753-BA-60 is an HAPs free fast drying acrylic modified alkyd. Used in applications where good flexibility and gloss / color retention are desired.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 5 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent n Butyl Acetate
Modifier ACR
Oil Dehydrated Castor Oil
Reduced Viscosity Q-T
Reduced NVM 50
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Farm Implement / Equipment
Metal Product Finishes
Bake Enamels with melamines and ureas

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Calcium 0.03%
Zirco 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7634-TBA-60

Polychem 7634-TBA-60 (Z8745)

Polychem 7634-TBA-60 is an premium fast drying acrylic modified alkyd for applications where good flexibility and gloss/color retention are desired. This is a t-Butyl Acetate cut version of 7459-X-50.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 14
Gardner Color 4 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier ACR
Oil Dehydrated Castor Oil
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 5 max

 

SUGGESTED USES
Farm Implement/Equipment
Metal Product Finishes
Bake Enamels with Melamines and Ureas

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Nuxtra 0.02%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7683-B-80

Polychem 7683-B-80 (Z8919)

Polychem 7683-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z3-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity F-L
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX @80% NVM
0 MAX @ 70% NVM

 

SUGGESTED USES
Farm implements/equipment
Metal Product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7577-KD-65

Polychem 7577-KD-65 (Z8434)

Polychem 7577-KD-65 is an VT modified Linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of great than 100F, but at the same time allowing for faster dry than standard mineral spirits cuts.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 13
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity C-E
Reduced NVM 45
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7565-B-60

Polychem 7565-B-60 (Z8265)

Polychem 7565-B-60 is an acrylic-VT modified alkyd, combining the fast dry properties of VT alkyds with improved durability. This resin is cut in a combination of mineral spirits and Solvent 100 to achieve a flashpoint of 100°F minimum.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 8
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Mineral Spirits/100 Solvent
Modifier VT/ ACR
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 8-6693-V-60

Polychem 8-6693-V-60 (Z0184-1)

Polychem 8-6693-V-60 is an fast drying vinyl toluene alkyd that achieves durable high gloss finishes with exceptional water and solvent resistance. It exhibits excellent surface wetting and adhesion combined with the usual fast set and dry of a vinyl toluene alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7445-V-75

Polychem 7445-V-75 (Z8098)

Polychem 7445-V-75 is an high solids vinyl toluene modified alkyd supplied at 75% in VM&P Naptha.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z2
Acid Number 5 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 60
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Wood finishes
Aerosol coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Calcium 0.20%
Zirconium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7563-V-60

Polychem 7563-V-60 (Z0777)

Polychem 7563-V-60 is an vinyl toluene copolymer designed for use in primers, enamels, aerosols, and sanding sealers where lacquer type dry is required. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 4
Gardner Color 5 Maximum
Weight Per Gallon 7.4 ± 0.1
Solvent VM&P
Modifier VT
Oil Linseed Oil
Reduced Viscosity C-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Equipment enamels
Floor sealers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7528-M-60

Polychem 7528-M-60 (Z8206)

Polychem 7528-M-60 is an vinyl toluene modified alkyd supplied at 60% in a narrow cut aliphatic hydrocarbon solvent, providing a flash point of greater than 100 degrees F, but at the same time allowing for faster dry than standard mineral spririt cuts. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Soybean Oil
Reduced Viscosity F-H
Reduced NVM 40
Reduction Solvent Quick Drying Mineral Spirits
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosols
Metal furniture and toy finishes
Floor sealers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.02%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7520-M-60

Polychem 7520-M-60 (Z8130)

Polychem 7520-M-60 is an vinyl toluene modified linseed oil in a narrow cut aliphatic hydrocarbon, providing a flash point of greater than 100 degrees F, (combustible range), but at the same time allowing for faster dry than standard mineral spirit cuts. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H X-Z1
Acid Number 13
Gardner Color 7 Maximum
Weight Per Gallon 7.45 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity D-E
Reduced NVM 40
Reduction Solvent Quick Drying Mineral Spirits
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Sanding sealers with improved open time
Equipment and metal furniture enamels
Miscellaneous fast air dry industrial or trade sale finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.01%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,