Medium Oil Alkyds

POLYCHEM G2509HV-MS16-50

Polychem G2509HV-MS16-50 (Z2040)

Polychem G2509HV-MS16-50 is an glyptal medium oil Soya alkyd. It is a general-purpose vehicle for brushing or spraying enamels or primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 7.66 ± 0.1
Solvent MS-16
Modifier –
Oil Soybean Oil
Reduced Viscosity M-Q
Reduced NVM 40
Reduction Solvent MS-16
Clarity Clear

 

SUGGESTED USES
Used for light color applications, low bake applications and dipping enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 4-6 hrs.
Hard

Driers:
Cobalt 0.04%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7700-X-60

Polychem 7700-X-60 (Z8949)

Polychem 7700-X-60 is an medium oil alkyd formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H V-X
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 8.43 ± 0.1
Solvent Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity F-I
Reduced NVM 50
Reduction Solvent xylene
Clarity 10 max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7657-TBA-60

Polychem 7657-TBA-60 (Z8835)

Polychem 7657-TBA-60 is an medium oil Soya alkyd designed specifically for applications where fast dry is of importance. This product is low-VOC and is a t-Butyl Acetate cut version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H P-T
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil Soybean Oil
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Traffic Paint
Farm and Implement Enamels
General Metal Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.05%
Manganese 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7553-V-50HV

Polychem 7553-V-50HV (Z8246-1)

Polychem 7553-V-50HV is an medium soya chain stopped alkyd cut to 50% in VM&P. The resin provides finishes with fast dry and good film hardness. This is a high viscosity version of 7553-V-50, Z8246.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z5
Acid Number 9
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent VM&P / Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity U-X
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
General purpose industrial finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7260-V-60

Polychem 7260-V-60 (Z7832)

Polychem 7260-V-60 is an medium soya alkyd designed for fast drying traffic paints.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z3-Z5
Acid Number 9
Gardner Color 5 Maximum
Weight Per Gallon 7.85 ± 0.1
Solvent VM&P
Modifier –
Oil Soybean Oil
Reduced Viscosity G-I
Reduced NVM 45
Reduction Solvent VM&P
Clarity 10 MAX

 

SUGGESTED USES
Traffic Paints
Implement Enamels
General Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Magnesium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7526-M-50

Polychem 7526-M-50 (Z8150)

Polychem 7526-M-50 is an medium oil length TOFA alkyd designed for trade sale paints with excellent color retention and non-yellowing characteristics. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z4-Z6
Acid Number 14
Gardner Color 6 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity Q-U
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Trade sale paints
Industrial air dry and baking enamels
Utility enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.3
Calcium 0.04
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7517-M-75

Polychem 7517-M-75 (Z8123)

Polychem 7517-M-75 is an high solids medium oil alkyd for use in air dry / forced dry systems. Brush enamels or primers with VOC levels of 340-400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 4 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-G
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Spray or dip primers
Brush enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.40%
Calcium 0.04%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7489-M-50

Polychem 7489-M-50 (Z8079)

Polychem 7489-M-50 is an medium oil alkyd resin providing low viscosity for use in brushable coating. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H W-Y
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity C-E
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Gloss and semigloss enamels
Porch and deck enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7755-10-60

Polychem 7755-10-60 (Z2317)

Polychem 7755-10-60 is an medium soya chain stopped alkyd cut to 60% in Aromatic 100, designed for fast air dry or low bake finishes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.45 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Soybean Oil/Sunflower Oil
Reduced Viscosity D-H
Reduced NVM 45
Reduction Solvent 100 Solvent
Clarity 5 Max

 

SUGGESTED USES
General purpose industrial finishes.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 6766-M-50

Polychem 6766-M-50 (Z4608)

Polychem 6766-M-50 is an medium soya alkyd designed specifically for trade sales applications. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z3
Acid Number 8 to 16
Gardner Color 7 Maximum
Weight Per Gallon 7.55 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity E-H
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Gloss enamels
Semi-gloss enamels
Floor paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,