OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

Coconut Alkyds

POLYCHEM 7734-BA-75

Polychem 7734-BA-75 (Z8990)

Polychem 7734-BA-75 is an low HAPS Coconut Short oil alkyd supplied at 75% solids in n-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z3
Acid Number 22 to 28
Gardner Color 4 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity E-I
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
Polychem 7734 is ideal for light color and clear furniture varnishes as well as non-yellowing high bake enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

POLYCHEM 7711-BA-70

Polychem 7711-BA-70 (Z8963)

Polychem 7711-BA-70 is an HAPs free coconut short oil alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity Q-T
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM G7741HV-X-70

Polychem G7741HV-X-70 (Z2114)

Polychem G7741HV-X-70 is an glyptal short oil non-drying alkyd. It has low viscosity, excellent compatibility, adequate hardness, good sanding lacquers and very good flexibility giving excellent cold check results. Color and color retention are of the highest order.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 3 Maximum
Weight Per Gallon 8.8 ± 0.1
Solvent Xylene
Modifier
Oil Coconut Oil
Reduced Viscosity H-L
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used as a plasticizer for nitrocellulose lacquers for wood furniture.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry: 25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard

Driers

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7637-TBA-65

Polychem 7637-TBA-65 (Z8755)

Polychem 7637-TBA-65 is an short coconut alkyd solution for use as a baking vehicle in combination with amnioplast resins or as a plasticizer for lacquers. This is a t-Butyl Acetate version of 7610 and is used to formulate very low VOC coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 65
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 3 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent t-Butyl Acetate
Modifier
Oil Coconut Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Baking Enamels
Plasticizer for Lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7137-K-85

Polychem 7137-K-85 (Z7633)

Polychem 7137-K-85 is an high solids coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 85
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 4 Maximum
Weight Per Gallon 8.96 ± 0.1
Solvent Methyl Propyl Ketone
Modifier
Oil Coconut Oil
Reduced Viscosity D-G
Reduced NVM 70
Reduction Solvent Methyl Propyl Ketone
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
High solids baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7137-X-60

Polychem 7137-X-60 (Z7632)

Polychem 7137-X-60 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 2 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier
Oil Coconut Oil
Reduced Viscosity A-D
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Economical baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7610-OX-50

Polychem 7610-OX-50 (Z8640)

Polychem 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 2 Maximum
Weight Per Gallon 10.2 ± 0.1
Solvent Oxsol 100
Modifier
Oil Coconut Oil
Reduced Viscosity R-U
Reduced NVM 40
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,