OPC Polymers has been designated an Essential Business / Essential Critical Infrastructure Workforce under Ohio and U.S. government emergency orders, and we will continue to operate during our normal business hours. We have instituted expert-recommended social distancing, enhanced sanitizing, and revised personnel scheduling practices including remote work to protect the health and safety of our employees. We thank you for understanding that lead times and service response may be affected.

Long Oil Alkyds

POLYCHEM 7752-OX-70

Polychem 7752-OX-70 (Z2311)

Polychem 7752-OX-70 is an long oil linseed alkyd with quick drying ability. It is formulated for use VOC free coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 9.27 ± 0.1
Solvent Oxsol 100
Modifier
Oil Linseed Oil
Reduced Viscosity R-V
Reduced NVM 55
Reduction Solvent Oxsol 100
Clarity CLEAR

 

SUGGESTED USES
Used as a general-purpose stain vehicle.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06%
Calcium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7589-100

Polychem G7589-100 (Z2075)

Polychem G7589-100 is an glyptal long oil alkyd. It has quick surface dry which makes it less prone to the incorporation of dirt or other contaminants.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99.5
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 9 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent
Modifier
Oil Soybean Oil
Reduced Viscosity
Reduced NVM
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Used as a grinding vehicle to obtain good initial gloss in house paints because of its very good wetting properties.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free

Driers:
Cobalt 0.04%
Calcium 0.1%
Zirconium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7798-MS16-70

Polychem G7798-MS16-70 (Z2167)

Polychem G7798-MS16-70 is an glyptal long oil linseed alkyd. It has quick drying ability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z3-Z5
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent MS-16
Modifier
Oil Linseed Oil
Reduced Viscosity D-F
Reduced NVM 50
Reduction Solvent MS16
Clarity clear

 

SUGGESTED USES
Used as a general-purpose stain vehicle.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free

Driers:
Cobalt 0.06%
Calcium 0.1%

The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7790-MS7-60

Polychem G7790-MS7-60 (Z2152)

Polychem G7790-MS7-60 is an product designed to be used in a low odor architectural system. It also provides excellent gloss and color retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z3-Z4
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 7.83 ± 0.1
Solvent MS-7
Modifier
Oil Soybean Oil
Reduced Viscosity S-V
Reduced NVM 50
Reduction Solvent MS7
Clarity Clear

 

SUGGESTED USES
Low odor architectural coating.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5 – 6 Hours
Driers:
Cobalt 0.04%
Calcium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G2507-OMS-70

Polychem G2507-OMS-70 (Z2033)

Polychem G2507-OMS-70 is an general purpose gloss air drying enamel vehicle with excellent resistance to yellowing on aging. This resin is designed for use in enamels where low V.O.C. is required.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z3-Z5
Acid Number 14
Gardner Color 8 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Odorless Mineral Spirits
Modifier
Oil Soybean Oil
Reduced Viscosity G-K
Reduced NVM 50
Reduction Solvent Odorless Mineral Spirits
Clarity Clear

 

SUGGESTED USES
Used for high quality exterior gloss and trim enamels. Also used in many industrial finishes such as machinery enamels, freight and marine paints, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5-6 hrs.
Driers:
Cobalt 0.06%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G2504HV-MS16-60

Polychem G2504HV-MS16-60 (Z2000)

Polychem G2504HV-MS16-60 is an general purpose gloss air drying enamel with excellent resistance to yellowing on aging and exposure to kitchen fumes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.76 ± 0.1
Solvent MS-16
Modifier
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 50
Reduction Solvent MS-16
Clarity clear

 

SUGGESTED USES
Used for high quality interior or exterior architectural gloss and trim enamels. Also used in many industrial finishes such as machinery enamels, freight and marine paints, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 5-6 hrs.
Driers:
Cobalt 0.04%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7662-100

Polychem 7662-100 (Z8850)

Polychem 7662-100 is an long oil soya alkyd designed for use with latex in exterior house paints. It is recommended to be used in the 20% resin solids range to improve adhesion and water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 8.51 ± 0.1
Solvent
Modifier
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 70
Reduction Solvent ms
Clarity 10 max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7574-M-70

Polychem 7574-M-70 (Z8292)

Polychem 7574-M-70 is an long oil soya alkyd useful for brush enamels and as a modifier to achieve lower VOC.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H V-W
Acid Number 8
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil Soybean Oil
Reduced Viscosity G-J
Reduced NVM 60
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7559-M-75

Polychem 7559-M-75 (Z8262)

Polychem 7559-M-75 is an high solids long oil alkyd designed to provide enamels meeting 350 grams/liter VOC with excellent non-yellowing characteristics. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.25 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil Tall Oil Fatty Acid
Reduced Viscosity O-Q
Reduced NVM 60
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR

 

SUGGESTED USES
Architectural enamels
Trim and trellis paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06
Calcium 0.04
Zirconium 0.50
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7549-M-90

Polychem 7549-M-90 (Z8249)

Polychem 7549-M-90 is an high solids long oil alkyd designed as a modifying resin for VOC compliant enamels to meet the AIM limits of 380g/l for nonflat coatings. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier
Oil Sunflower Oil
Reduced Viscosity H-K
Reduced NVM 65
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Blend vehicle for architectural or general industrial enamels to reduce the VOC of other conventional resins.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
Zirconium 0.30%
Dri-Rx 0.1
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,