Short Oil Alkyds

POLYCHEM 7728-10-50

Polychem 7728-10-50 (Z8984)

Polychem 7728-10-50 is an Hi-Sol 10 version of Polychem 6841-X-50.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity H-L
Reduced NVM 40
Reduction Solvent 100 Solvent
Clarity 5 Max

 

SUGGESTED USES
Air dry or short bake industrial enamels
Conversion varnishes
Primers and shop coats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7797-X-50

Polychem G7797-X-50 (Z2164)

Polychem G7797-X-50 is an chain stopped short oil oxidizing alkyd. It exhibits good shelf stability and fast baking speed. It also has excellent hardness, gloss and gloss retention.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 34
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used in both air dry and baking industrial applications.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 0-20 mins
Hard

Driers:
Cobalt 0.06%
Calcium 0.2%
Zirconium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7794-X-50

Polychem G7794-X-50 (Z2158)

Polychem G7794-X-50 is an chain stopped short oil oxidizing alkyd. It offers a very fast tack time, slow cutting curve and excellent hardness. It also has good gloss with exterior durability when used with air dry enamels.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-F
Reduced NVM 34
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Used for air dry and baking industrial applications, as well as melamine modified enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 10-20 mins.
Hard

Driers:
Cobalt 0.06%
Calcium 0.2%
Zirconium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G7789-X-60

Polychem G7789-X-60 (Z2149)

Polychem G7789-X-60 is an short oil oxidizing alkyd. It is a general-purpose vehicle offering very good hardness, flexibility and color and gloss retention. It also has very good detergent resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 8
Gardner Color 5 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity P-U
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Use for industrial baking enamels and primers. It can also be used for all appliance finishes except those requiring the ultimate in color retention and detergent resistance.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7675-X-90

Polychem 7675-X-90 (Z8887)

Polychem 7675-X-90 is an high solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-VOC and can be formulated into low-VOC coatings where HAP-free is not a necessity.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z4-Z6
Acid Number 10
Gardner Color 12 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity U-Y
Reduced NVM 80
Reduction Solvent Xylene
Clarity 10 max

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7268-B-50

Polychem 7268-B-50 (Z7875)

Polychem 7268-B-50 is an Low-HAP version of POLYCHEM 6841-X-50. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z1-Z4
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent VM&P/Iso Butanol/ PM Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity G-I
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air dry or short bake industrial enamels
Conversion Varnishes
Primers and shop coats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6841-X-50

Polychem 6841-X-50 (Z6123-M)

Polychem 6841-X-50 is an short-oil TOFA alkyd formulated for air dry and low bake industrial finishes.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z1-Z4
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity H-K
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air dry or short bake industrial enamels
Conversion varnishes
Primers and shop coats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7482-PMA-90

Polychem 7482-PMA-90 (Z8068)

Polychem 7482-PMA-90 is an solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z3-Z5
Acid Number 12 to 19
Gardner Color 10 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent PM Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity V-X
Reduced NVM 80
Reduction Solvent PM Acetate
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,