Epoxy Ester Resins

POLYCHEM 7731-B-50

Polychem 7731-B-50 (Z8987)

Polychem 7731-B-50 is an epoxy ester based upon tall oil fatty acid that can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H W-Z
Acid Number 6
Gardner Color 8 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-G
Reduced NVM 40
Reduction Solvent n Butyl Acetate:HiSol 10
Clarity CLEAR

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

POLYCHEM 7733-X-50

Polychem 7733-X-50 (Z8989)

Polychem 7733-X-50 is an siliconized epoxy ester. It possesses good adhesion, chemical and high heat resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H U-X
Acid Number 10
Gardner Color 8 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Xylene
Modifier SILICONE
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR

 

SUGGESTED USES
Air and Bake Coatings
Maintenance Coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7460-V-60

Polychem 7460-V-60 (Z8060)

Polychem 7460-V-60 is an rosin modified epoxy ester designed for industrial and trade sales applications, providing high alkali, water, and solvent resistance. 7460-V-60 is based on the same resin solids as 7360-M-60, but reduced in VM&P NAPHTHA for applications, where a solvent with higher evaporation rate is desired. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H W-Y
Acid Number 7
Gardner Color 7 Maximum
Weight Per Gallon 7.5 ± 0.1
Solvent VM&P
Modifier Rosin Modified
Oil Tall Oil Fatty Acid
Reduced Viscosity O-U
Reduced NVM 50
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7449-10-50

Polychem 7449-10-50 (Z8049)

Polychem 7449-10-50 is an epoxy ester based upon tall oil fatty acid which can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H P-U
Acid Number 2
Gardner Color 6 Maximum
Weight Per Gallon 8 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7449-X-70

Polychem 7449-X-70 (Z8048)

Polychem 7449-X-70 is an high solids epoxy ester cut to 70% in xylene

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z2-Z5
Acid Number 2
Gardner Color 8 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity I-K
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7360-M-60

Polychem 7360-M-60 (Z7977)

Polychem 7360-M-60 is an rosin modified epoxy ester designed for industrial and trade sales applications, providing high alkali, water, and solvent resistance. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 8 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier Rosin Modified
Oil Tall Oil Fatty Acid
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7754-BA-75

Polychem 7754-BA-75 (Z2316)

Polychem 7754-BA-75 is an HAPs free epoxy ester based upon tall oil fatty acid which can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z5
Acid Number 2
Gardner Color 8 Maximum
Weight Per Gallon 8.45 ± 0.1
Solvent n Butyl Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity H-K
Reduced NVM 55
Reduction Solvent n Butyl Acetate
Clarity 5 Max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,