Wood

POLYCHEM 7549-M-90

Polychem 7549-M-90 (Z8249)

Polychem 7549-M-90 is an high solids long oil alkyd designed as a modifying resin for VOC compliant enamels to meet the AIM limits of 380g/l for nonflat coatings. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Sunflower Oil
Reduced Viscosity H-K
Reduced NVM 65
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Blend vehicle for architectural or general industrial enamels to reduce the VOC of other conventional resins.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
Zirconium 0.30%
Dri-Rx 0.1
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7536-M-70

Polychem 7536-M-70 (Z8224)

Polychem 7536-M-70 is an long oil soya alkyd designed to meet TTR-266, Type I, Class A specification. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Architectural Enamels
Exterior Trim Paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7137-K-85

Polychem 7137-K-85 (Z7633)

Polychem 7137-K-85 is an high solids coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 85
Viscosity, G-H Z2-Z4
Acid Number 10
Gardner Color 4 Maximum
Weight Per Gallon 8.96 ± 0.1
Solvent Methyl Propyl Ketone
Modifier –
Oil Coconut Oil
Reduced Viscosity D-G
Reduced NVM 70
Reduction Solvent Methyl Propyl Ketone
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
High solids baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7137-X-60

Polychem 7137-X-60 (Z7632)

Polychem 7137-X-60 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 2 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent Xylene
Modifier –
Oil Coconut Oil
Reduced Viscosity A-D
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Economical baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7610-OX-50

Polychem 7610-OX-50 (Z8640)

Polychem 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 2 Maximum
Weight Per Gallon 10.2 ± 0.1
Solvent Oxsol 100
Modifier –
Oil Coconut Oil
Reduced Viscosity R-U
Reduced NVM 40
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 6502-100

Polychem 6502-100 (Z2428)

Polychem 6502-100 is an pure long oil alkyd formulated especially for the modification of latex house paints or other exterior latex coating applications where chalk binding, flexibility, and adhesion are necessary to augment the properties of a latex system. The modification level is typically 25% based upon total resin solids. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 99.5
Viscosity, G-H W-Y
Acid Number 10
Gardner Color 10 Maximum
Weight Per Gallon 8.35 ± 0.1
Solvent –
Modifier –
Oil Linseed Oil
Reduced Viscosity B-D
Reduced NVM 70
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Manganese 0.03%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,