Aerosol

POLYCHEM 7060-V-60

Polychem 7060-V-60 (Z6564)

Polychem 7060-V-60 is an acrylic-vinyl toluene modified alkyd combining the fast dry properties of VT alkyds with improved durability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.7 ± 0.1
Solvent VM&P
Modifier VT/ACR
Oil Soybean Oil
Reduced Viscosity D-E
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Machinery enamel
Implements
Aerosols

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7754-BA-75

Polychem 7754-BA-75 (Z2316)

Polychem 7754-BA-75 is an HAPs free epoxy ester based upon tall oil fatty acid which can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z5
Acid Number 2
Gardner Color 8 Maximum
Weight Per Gallon 8.45 ± 0.1
Solvent n Butyl Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity H-K
Reduced NVM 55
Reduction Solvent n Butyl Acetate
Clarity 5 Max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM OP 7655-KD-75

Polychem OP 7655-KD-75 (Z2315)

Polychem OP 7655-KD-75 is an high solids VT oil reduced in narrow cut mineral spirits.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z3
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity J-M
Reduced NVM 60
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
Stain Stopping Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7584-V-60

Polychem 7584-V-60 (Z8490)

Polychem 7584-V-60 is an low HAPs version of 7060-V-60 copolymer. It can be formulated into a HAPs free coating.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.7 ± 0.1
Solvent
Modifier VT/ ACR
Oil Soybean Oil
Reduced Viscosity D-E
Reduced NVM 40
Reduction Solvent VM&P
Clarity 10MAX

 

SUGGESTED USES
Machinery Enamel
Implements
Aerosol

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7581-B-80

Polychem 7581-B-80 (Z8462)

Polychem 7581-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good projected durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z5-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity E-G
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7292-V-60

Polychem 7292-V-60 (Z7923)

Polychem 7292-V-60 is an economical vinyl toluene modified alkyd designed for fast-dry finishes with excellent water and alkali resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z3
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosols
Metal furniture and toy finishes
Floor sealers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.02%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7008-T-60

Polychem 7008-T-60 (Z3418)

Polychem 7008-T-60 is an chain stopped TOFA alkyd which provides a versatile vehicle for aerosol and industrial finishes with good balance of properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H T-W
Acid Number 15
Gardner Color 8 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Toluene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-E
Reduced NVM 50
Reduction Solvent Toluene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
White or light colored enamels
Enamels for machinery, toys, metal cabinets

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.4%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7006-X-50

Polychem 7006-X-50 (Z0750)

Polychem 7006-X-50 is an high performance styrene – acrylic modified alkyd designed for industrial applications and aerosol gloss enamels where fast dry characteristics and economy are important.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H N-R
Acid Number 15
Gardner Color 5 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Xylene
Modifier ACR
Oil Soybean Oil
Reduced Viscosity C-E
Reduced NVM 40
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Metal product finishes
Aerosols

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,