Industrial

POLYCHEM 7675-X-90

Polychem 7675-X-90 (Z8887)

Polychem 7675-X-90 is an high solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-VOC and can be formulated into low-VOC coatings where HAP-free is not a necessity.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z4-Z6
Acid Number 10
Gardner Color 12 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity U-Y
Reduced NVM 80
Reduction Solvent Xylene
Clarity 10 max

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7660-X-50

Polychem 7660-X-50 (Z8845)

Polychem 7660-X-50 is an high drink chain stopped aklyd having fast set and tack free properties with excellent durability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z5
Acid Number 15
Gardner Color 6 Maximum
Weight Per Gallon 8.18 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity N-P
Reduced NVM 40
Reduction Solvent Xylene
Clarity 10 max

 

SUGGESTED USES
White or light colored enamels
Enamels for machinery, toys, etc.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.04%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7641-EB-70

Polychem 7641-EB-70 (Z8777)

Polychem 7641-EB-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is an EB cut of 7588 and HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent Ethylene Glycol Monobutylether
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity clear to slightly hazy

 

SUGGESTED USES
Air dry/ Force dry/ Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7605-K-80

Polychem 7605-K-80 (Z8625)

Polychem 7605-K-80 is an short oil soya based chain stopped alkyd cut to 80% in methyl propyl ketone. 7605 is a HAPS Free version of 7212. It is useful in air dry, force dry or bake enamels, and is designed to have flexibility and adhesion. It dries in heavy films comparable to a conventional solids short to medium alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z-Z3
Acid Number 12
Gardner Color 6 Maximum
Weight Per Gallon 9 ± 0.1
Solvent Methyl Propyl Ketone/100 Solvent
Modifier –
Oil Soybean Oil
Reduced Viscosity C-F
Reduced NVM 60
Reduction Solvent Xylene
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels
Bake enamels with melamine

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Zirconium 0.4%
Cobalt 0.05%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7565-B-60

Polychem 7565-B-60 (Z8265)

Polychem 7565-B-60 is an acrylic-VT modified alkyd, combining the fast dry properties of VT alkyds with improved durability. This resin is cut in a combination of mineral spirits and Solvent 100 to achieve a flashpoint of 100°F minimum.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z2-Z4
Acid Number 8
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Mineral Spirits/100 Solvent
Modifier VT/ ACR
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 40
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Calcium 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 8-6693-V-60

Polychem 8-6693-V-60 (Z0184-1)

Polychem 8-6693-V-60 is an fast drying vinyl toluene alkyd that achieves durable high gloss finishes with exceptional water and solvent resistance. It exhibits excellent surface wetting and adhesion combined with the usual fast set and dry of a vinyl toluene alkyd.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Y-Z1
Acid Number 10
Gardner Color 5 Maximum
Weight Per Gallon 7.65 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7556-10-80

Polychem 7556-10-80 (Z8252)

Polychem 7556-10-80 is an universal dispersion resin providing compatibility with both trade sale and industrial coatings.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H S-V
Acid Number 10
Gardner Color 13 Maximum
Weight Per Gallon 8.6 ± 0.1
Solvent 100 Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-H
Reduced NVM 70
Reduction Solvent 100 Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7555-K-75

Polychem 7555-K-75 (Z8250)

Polychem 7555-K-75 is an short oil TOFA based chain stopped alkyd supplied @ 75% in MPK. The resin provides finishes with excellent dry, gloss retention and low VOC content.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z3
Acid Number 15
Gardner Color 7 Maximum
Weight Per Gallon 8.85 ± 0.1
Solvent Methyl Propyl Ketone
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-H
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.01%
Manganese 0.15%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7553-V-50HV

Polychem 7553-V-50HV (Z8246-1)

Polychem 7553-V-50HV is an medium soya chain stopped alkyd cut to 50% in VM&P. The resin provides finishes with fast dry and good film hardness. This is a high viscosity version of 7553-V-50, Z8246.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z5
Acid Number 9
Gardner Color 7 Maximum
Weight Per Gallon 7.6 ± 0.1
Solvent VM&P / Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity U-X
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
General purpose industrial finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
Cobalt 0.05%
Zirco 0.50%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7445-V-75

Polychem 7445-V-75 (Z8098)

Polychem 7445-V-75 is an high solids vinyl toluene modified alkyd supplied at 75% in VM&P Naptha.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z2
Acid Number 5 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 60
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Wood finishes
Aerosol coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Calcium 0.20%
Zirconium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,