Industrial

POLYCHEM G7800-V-50

Polychem G7800-V-50 (Z2170)

Polychem G7800-V-50 is an glyptal paint traffic alkyd. It has excellent bleed resistance, rapid set up and good performance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z4-Z6
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 7.5 ± 0.1
Solvent VM&P
Modifier –
Oil Linseed Oil / Soybean Oil
Reduced Viscosity R-V
Reduced NVM 40
Reduction Solvent VM&P
Clarity CLEAR

 

SUGGESTED USES
Used for traffic paints or industrial primers and fast evaporating enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry 3-5 Minutes
Tack Free 4-5 Hours
Hard

Driers
Cobalt 0.04%
Calcium 0.2%
Zirconium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM G2509HV-MS16-50

Polychem G2509HV-MS16-50 (Z2040)

Polychem G2509HV-MS16-50 is an glyptal medium oil Soya alkyd. It is a general-purpose vehicle for brushing or spraying enamels or primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z3-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 7.66 ± 0.1
Solvent MS-16
Modifier –
Oil Soybean Oil
Reduced Viscosity M-Q
Reduced NVM 40
Reduction Solvent MS-16
Clarity Clear

 

SUGGESTED USES
Used for light color applications, low bake applications and dipping enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25 C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free 4-6 hrs.
Hard

Driers:
Cobalt 0.04%
Calcium 0.1%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM G7789-X-60

Polychem G7789-X-60 (Z2149)

Polychem G7789-X-60 is an short oil oxidizing alkyd. It is a general-purpose vehicle offering very good hardness, flexibility and color and gloss retention. It also has very good detergent resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z1-Z3
Acid Number 8
Gardner Color 5 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity P-U
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR

 

SUGGESTED USES
Use for industrial baking enamels and primers. It can also be used for all appliance finishes except those requiring the ultimate in color retention and detergent resistance.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Air Dry:
25C, 50% RH, 0.075 mm Wet
Touch Dry
Tack Free
Hard
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7700-X-60

Polychem 7700-X-60 (Z8949)

Polychem 7700-X-60 is an medium oil alkyd formulated to give excellent pigment wetting properties. It will take a longer “drink” of solvent in paint formulations than conventional medium length alkyds.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H V-X
Acid Number 16
Gardner Color 7 Maximum
Weight Per Gallon 8.43 ± 0.1
Solvent Xylene
Modifier –
Oil Soybean Oil
Reduced Viscosity F-I
Reduced NVM 50
Reduction Solvent xylene
Clarity 10 max

 

SUGGESTED USES
General utility enamels
Implement enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zirconium 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM G7825-X-50

Polychem G7825-X-50 (Z2203)

Polychem G7825-X-50 is an chain-stopped alkyd that gives fast dry times when used in air dry applications. It also shows good low temperature cure response with amino cross linkers when used in baking enamel formulations.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H V-X
Acid Number 14
Gardner Color 6 Maximum
Weight Per Gallon 8.33 ± 0.1
Solvent Xylene
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity M-P
Reduced NVM 45
Reduction Solvent Xylene
Clarity Clear

 

SUGGESTED USES
Used in aerosol and industrial touch-up and regular enamels.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7696-BA-75

Polychem 7696-BA-75 (Z8944)

Polychem 7696-BA-75 is an short oil TOFA based chain stopped alkyd supplied @ 75% in N-Butyl Acetate. The resin provides finishes with excellent dry, gloss retention and low VOC content.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 14
Gardner Color 7 Maximum
Weight Per Gallon 9 ± 0.1
Solvent n Butyl Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity A-D
Reduced NVM 50
Reduction Solvent
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.01%
Manganese 0.15%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7683-B-80

Polychem 7683-B-80 (Z8919)

Polychem 7683-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z3-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity F-L
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX @80% NVM
0 MAX @ 70% NVM

 

SUGGESTED USES
Farm implements/equipment
Metal Product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7657-TBA-60

Polychem 7657-TBA-60 (Z8835)

Polychem 7657-TBA-60 is an medium oil Soya alkyd designed specifically for applications where fast dry is of importance. This product is low-VOC and is a t-Butyl Acetate cut version of 6994.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H P-T
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil Soybean Oil
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Traffic Paint
Farm and Implement Enamels
General Metal Primers and Topcoats

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.05%
Manganese 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7639-TBA-60

Polychem 7639-TBA-60 (Z8765)

Polychem 7639-TBA-60 is an chain stopped TOFA alkyd formulated for use in fast drying durable finishes. This product is thinned in t-Butyl Acetate version of 6868 and used for very low VOC formulations.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 14
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity L-P
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 Max

 

SUGGESTED USES
Air dry or bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Zirconium 0.40%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7635-T-BA-60

Polychem 7635-T-BA-60 (Z8747)

Polychem 7635-T-BA-60 is an short linseed/rosin/phenolic modified oxidizing alkyd which offers lift resistance and fast dry. This is the same as OPC 7348-X-50 but reduced in t-Butyl Acetate.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 60
Viscosity, G-H Z-Z2
Acid Number 15 to 25
Gardner Color 12 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent t-Butyl Acetate
Modifier Phenolic/ Rosin
Oil Linseed Oil/TUNG Oil
Reduced Viscosity P-S
Reduced NVM 50
Reduction Solvent t-Butyl Acetate
Clarity 10 max

 

SUGGESTED USES
Primers and surfacers
Fast drying enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,