Compliant Resins

POLYCHEM 7447-X-80

Polychem 7447-X-80 (Z8041)

Polychem 7447-X-80 is an very fast air drying vinyl toluene co-polymer resin supplied at 80% solids in xylene. It is useful as the binder in aerosol formulations, industrial enamels and sanding sealers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent Xylene
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosol coatings
Wood finishes
Sanding sealers
Industrial enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Zirconium 0.20%
Calcium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7754-BA-75

Polychem 7754-BA-75 (Z2316)

Polychem 7754-BA-75 is an HAPs free epoxy ester based upon tall oil fatty acid which can be formulated to produce air dry or bake finishes with excellent adhesion and resistance properties.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z5
Acid Number 2
Gardner Color 8 Maximum
Weight Per Gallon 8.45 ± 0.1
Solvent n Butyl Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity H-K
Reduced NVM 55
Reduction Solvent n Butyl Acetate
Clarity 5 Max

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM OP 7655-KD-75

Polychem OP 7655-KD-75 (Z2315)

Polychem OP 7655-KD-75 is an high solids VT oil reduced in narrow cut mineral spirits.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z3
Acid Number 10
Gardner Color 6 Maximum
Weight Per Gallon 7.8 ± 0.1
Solvent Quick Drying Mineral Spirits
Modifier VT
Oil Linseed Oil
Reduced Viscosity J-M
Reduced NVM 60
Reduction Solvent Quick Drying Mineral Spirits
Clarity 10 max

 

SUGGESTED USES
Stain Stopping Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Manganese 0.03%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged , ,

POLYCHEM 7588-PP-70

Polychem 7588-PP-70 (Z8520)

Polychem 7588-PP-70 is an water reducible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 40 to 50
Gardner Color 7 Maximum
Weight Per Gallon 8.95 ± 0.1
Solvent Propylene Glycol Mono-Propylether/Sec Butanol
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air Dry / Force Dry / Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7581-B-80

Polychem 7581-B-80 (Z8462)

Polychem 7581-B-80 is an premium acrylic modified alkyd designed for air dry, force dry or bake finishes providing a good degree of flexibility and good projected durability/color retention with good early water resistance. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z5-Z7
Acid Number 10
Gardner Color 7 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent Methyl Propyl Ketone/Methyl Amyl Ketone
Modifier ACR
Oil Mix of Oxidizing Oils
Reduced Viscosity E-G
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 10 Max

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7579-PP-75

Polychem 7579-PP-75 (Z8442)

Polychem 7579-PP-75 is an HAPS free water reducible phenolic modified alkyd used for primers. This primer vehicle offers good salt spray resistance, hot alkali, and hot oil resistance with good stability and fast recoat capability.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 33 to 42
Gardner Color 10 Maximum
Weight Per Gallon 8.85 ± 0.1
Solvent Propylene Glycol Mono-Propylether
Modifier Phenolic
Oil Mix of Oxidizing Oils
Reduced Viscosity –
Reduced NVM –
Reduction Solvent
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
VOC Compliant primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.10%
Calcium 0.15%
Zirconium 0.15%
Manganese 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7610-OX-50

Polychem 7610-OX-50 (Z8640)

Polychem 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 50
Viscosity, G-H Z-Z2
Acid Number 12
Gardner Color 2 Maximum
Weight Per Gallon 10.2 ± 0.1
Solvent Oxsol 100
Modifier –
Oil Coconut Oil
Reduced Viscosity R-U
Reduced NVM 40
Reduction Solvent
Clarity 10 max

 

SUGGESTED USES
Baking enamels
Plasticizer for lacquers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7478-B-79

Polychem 7478-B-79 (Z8069)

Polychem 7478-B-79 is an phenolic modified alkyd supplied at 79% solids in a HAP-FREE solvent blend. Excellent choice for specialty coatings, especially non-lifting primers. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 79
Viscosity, G-H Z2-Z4
Acid Number 12 to 24
Gardner Color 15 Maximum
Weight Per Gallon 8.9 ± 0.1
Solvent 100 Solvent/Methyl Propyl Ketone/PM Acetate
Modifier Phenolic
Oil Linseed Oil/TUNG Oil/Tall Oil Fatty Acid
Reduced Viscosity E-H
Reduced NVM 65
Reduction Solvent Methyl Propyl Ketone
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Industrial Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06%
Calcium 0.20%
Zirconium 0.30%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7482-PMA-90

Polychem 7482-PMA-90 (Z8068)

Polychem 7482-PMA-90 is an solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z3-Z5
Acid Number 12 to 19
Gardner Color 10 Maximum
Weight Per Gallon 9.2 ± 0.1
Solvent PM Acetate
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity V-X
Reduced NVM 80
Reduction Solvent PM Acetate
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Metal product finishes
Bake enamels with melamine
Farm implements / equipment

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
(not specified)
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7014-BA-75

Polychem 7014-BA-75 (Z0766)

Polychem 7014-BA-75 is an fast dry chain stopped alkyd. It dries in 5-10 min. to handle. It allows for formulation of low VOC coatings and has the added feature of responding to heated paint application for even lower viscosity.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Y-Z2
Acid Number 8 to 16
Gardner Color 8 Maximum
Weight Per Gallon 9.1 ± 0.1
Solvent n Butyl Acetate
Modifier –
Oil Linseed Oil
Reduced Viscosity A-B
Reduced NVM 50
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
General purpose industrial finishes
Primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.03%
Zircon 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged