Compliant Resins

POLYCHEM 7559-M-75

Polychem 7559-M-75 (Z8262)

Polychem 7559-M-75 is an high solids long oil alkyd designed to provide enamels meeting 350 grams/liter VOC with excellent non-yellowing characteristics. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z4
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.25 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity O-Q
Reduced NVM 60
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR

 

SUGGESTED USES
Architectural enamels
Trim and trellis paints

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.06
Calcium 0.04
Zirconium 0.50
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7555-K-75

Polychem 7555-K-75 (Z8250)

Polychem 7555-K-75 is an short oil TOFA based chain stopped alkyd supplied @ 75% in MPK. The resin provides finishes with excellent dry, gloss retention and low VOC content.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z1-Z3
Acid Number 15
Gardner Color 7 Maximum
Weight Per Gallon 8.85 ± 0.1
Solvent Methyl Propyl Ketone
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-H
Reduced NVM 60
Reduction Solvent Methyl Propyl Ketone
Clarity 5 MAX

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Aerosol enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.01%
Manganese 0.15%
Zirconium 0.25%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7549-M-90

Polychem 7549-M-90 (Z8249)

Polychem 7549-M-90 is an high solids long oil alkyd designed as a modifying resin for VOC compliant enamels to meet the AIM limits of 380g/l for nonflat coatings. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 90
Viscosity, G-H Z1-Z3
Acid Number 12
Gardner Color 7 Maximum
Weight Per Gallon 8.2 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Sunflower Oil
Reduced Viscosity H-K
Reduced NVM 65
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Blend vehicle for architectural or general industrial enamels to reduce the VOC of other conventional resins.

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Calcium 0.20%
Zirconium 0.30%
Dri-Rx 0.1
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7445-V-75

Polychem 7445-V-75 (Z8098)

Polychem 7445-V-75 is an high solids vinyl toluene modified alkyd supplied at 75% in VM&P Naptha.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z-Z2
Acid Number 5 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8 ± 0.1
Solvent VM&P
Modifier VT
Oil Soybean Oil
Reduced Viscosity I-M
Reduced NVM 60
Reduction Solvent VM&P
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Wood finishes
Aerosol coatings

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Calcium 0.20%
Zirconium 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7497-PP-70

Polychem 7497-PP-70 (Z8078)

Polychem 7497-PP-70 is an styrenated epoxy ester which can be formulated into water based metal primer and top coats, both air dry and baking systems. The polymer is cut in propylene glycol n-propyl ether and the composition is HAP FREE. This product is HAP-free.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z5-Z7
Acid Number 50 to 60
Gardner Color 6 Maximum
Weight Per Gallon 8.5 ± 0.1
Solvent Propylene Glycol Mono-Propylether
Modifier STY/EPOXY
Oil Tall Oil Fatty Acid
Reduced Viscosity T-V
Reduced NVM 50
Reduction Solvent Propylene Glycol Mono-Propylether
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
(not specified)

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.05%
Dri-Rx 0.05%
Zirconium 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7535-70

Polychem 7535-70 (Z8222T)

Polychem 7535-70 is an water dispersible oxidizing alkyd developed for fast air dry or bake finishes with a good balance of film properties, including excellent corrosion resistance.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H Z4-Z6
Acid Number 34 to 42
Gardner Color 7 Maximum
Weight Per Gallon 8.7 ± 0.1
Solvent
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity W-Z
Reduced NVM 30
Reduction Solvent water
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Air Dry / Force Dry / Bake
Primers
Industrial Finishes

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Calcium 0.10%
Zirconium 0.20%
Cobalt 0.10%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged

POLYCHEM 7519-B-70

Polychem 7519-B-70 (Z8126)

Polychem 7519-B-70 is an styrene/acrylic modified alkyd designed for air dry, force dry, or bake finishes providing a good degree of flexibility and good projected durability / color retention. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 70
Viscosity, G-H W-Z
Acid Number 14
Gardner Color 5 Maximum
Weight Per Gallon 8.4 ± 0.1
Solvent BLEND
Modifier ACR
Oil Soybean Oil/Sunflower Oil
Reduced Viscosity E-G
Reduced NVM 60
Reduction Solvent METHYL n-PROPYL KETONE MPK
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Farm implements / equipment
Metal product finishes
Bake enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.30%
Calcium 0.03%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7517-M-75

Polychem 7517-M-75 (Z8123)

Polychem 7517-M-75 is an high solids medium oil alkyd for use in air dry / forced dry systems. Brush enamels or primers with VOC levels of 340-400 grams/liter can be formulated. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z2-Z4
Acid Number 4 to 10
Gardner Color 7 Maximum
Weight Per Gallon 8.1 ± 0.1
Solvent Mineral Spirits, Low Aromatic
Modifier –
Oil Tall Oil Fatty Acid
Reduced Viscosity D-G
Reduced NVM 50
Reduction Solvent Mineral Spirits, Low Aromatic
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Spray or dip primers
Brush enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.03%
Zirconium 0.40%
Calcium 0.04%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7478-X-75

Polychem 7478-X-75 (Z8066)

Polychem 7478-X-75 is an phenolic modified alkyd supplied at 75% solids in xylene. Excellent choice for specialty coatings, especially non-lifting primers.

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 75
Viscosity, G-H Z4-Z6
Acid Number 12 to 24
Gardner Color 15 Maximum
Weight Per Gallon 8.65 ± 0.1
Solvent Xylene
Modifier Phenolic
Oil Linseed Oil/TUNG Oil/Tall Oil Fatty Acid
Reduced Viscosity N-Q
Reduced NVM 60
Reduction Solvent Xylene
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Industrial primers

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.08%
Calcium 0.20%
Zirconium 0.30%
Dri RX 0.20%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,

POLYCHEM 7447-BA-80

Polychem 7447-BA-80 (Z8042)

Polychem 7447-BA-80 is an very fast air drying vinyl toluene copolymer resin supplied at 80% solids in n-butyl acetate. It is useful as the binder in aerosol formulations, industrial enamels and sanding sealers. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

CHARACTERISTICS SPECIFICATIONS
Percent Non Volatile 80
Viscosity, G-H Z4-Z6
Acid Number 16
Gardner Color 6 Maximum
Weight Per Gallon 8.3 ± 0.1
Solvent n Butyl Acetate
Modifier VT
Oil Soybean Oil
Reduced Viscosity D-F
Reduced NVM 60
Reduction Solvent n Butyl Acetate
Clarity CLEAR TO SLIGHTLY HAZY

 

SUGGESTED USES
Aerosol coatings
Wood finishes
Sanding sealers
Industrial enamels

 

DRIER RECOMMENDATIONS (% metal on total binder solids)
Cobalt 0.02%
Zirconium 0.20%
Calcium 0.02%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
Tagged ,